Advertisement
ASSEMBLY
3.- Assemble the Roller Holder Arm (2) on the
Roller Support (7). Use the fixing bolt (11) and
secure the assembly with the screw (12), nut (13)
and washer (10).
2.- Roller holder arm
7.- Roller support
10.- 1/2" lock washer
11.- Fixing bolt
12.- 1/2 x 1-1/2 degree hex. bolt
machine
13.- 1/2" nut
4.- Adjust the pressure of the Roller (1) with which
it is required to work. To do this, use the bolts (14)
and secure them with R locks (15).
1.- Lump braker roller
14.- Fixing bolt
15.- 1/8 of diameter R latches
23
Advertisement
