Advertisement
OPERATION
LATERAL SUBSOILER LEVELING
Lateral leveling is controlled by the tractor lift arms.
Make sure that the main body of the Subsoiler is
parallel to the ground so that all tiller arms rotate to
the same depth.
After the tiller arms have penetrated the ground and
you have set the working depth, stop the tractor and
stand behind the Subsoiler to confirm that the main
body is parallel to the ground.
If the main body is not parallel to the ground, raise
the implement and adjust the tractor hitch arms until
the Subsoiler is level.
LONGITUDINAL LEVELING OF THE SUBSOILER
Longitudinal leveling is controlled by the tractor's
center hitch arm.
To determine if the Subsoiler is level longitudinally,
observe the main body while working under load.
Make sure that all rudders are at the same level.
It is more efficient to work the Subsoiler when all
shanks are level.
If the main body is not level longitudinally raise the
Subsoiler and adjust it by lengthening or shortening
the third point arm.
13
Advertisement
