Advertisement
SAFETY RULES
SAFE MAINTENANCE
Familiarize
yourself
with
the
maintenance
procedures before performing the work. The work
area must be clean and dry.
Do not carry out any greasing, repair or adjustment
work with the engine running.
Keep hands, feet and clothing away from moving
parts at all times. Put all controls in neutral to relieve
pressure. Lower all equipment to the ground. Stop
the engine. Remove the ignition key and wait for the
engine to cool.
Carefully support all machine parts being lifted for
maintenance work.
All components must be in good condition and
correctly installed. Repair damage immediately.
Replace any worn or broken parts. Keep all
machine components clean of grease, oil and
accumulated dirt.
CORRECT USE OF SEAT BELTS
Do not use a seat belt when working with a machine
that is not equipped with a rollover protector.
Transport the Subsoiler at a maximum of 10 mph.
Reduce speed when traveling over rough terrain.
Always drive at a speed that allows you to have
adequate steering and brake control.
09
Advertisement
