Advertisement
ASSEMBLY
3.- Place the Stopper (11) in the stopper holder
bushing of the Subsoiler Body (4). Use the Stopper
Bolt (12) and a R-Lock (13) to secure them. Place
the Third Point Bolt (14) over the center hitch of the
Subsoiler Body (4) and secure with an agricultural
latch (15). Insert the Bottom Bolt (16) into the side
attachments. Tighten them with the lock washer
(17) and the nut (18), attach the agricultural lock
(15) to each one.
4.- Subsoiler body
11.- Parking stand
12.- Stand pin
13.- 1/8 of diameter R bolt
14.- Bolt of the third point
15.- 3/8" agricultural latch
16.- Lower linkage hitch pin
17.- 1" lock washer
18.- 1" nut
18
Advertisement
