Vivint Smart Hub Lite Getting Started User Manual page 68

Automatic Fire Alarm
If your detectors trigger a fire emergency alarm before you sense a problem AND the fire
alarm is already sounding, follow these steps:
1. If flames and/or smoke are present, yell FIRE! to alert anyone else around.
2. Evacuate all occupants from your home, and then call your local fire department
from a safe location.
OR
1. If no flames or smoke are apparent, investigate the possible causes of the alarm.
2. Go to your hub and enter your User PIN code to stop the fire alarm sounder.
3. Review the alarm memory to determine which sensor(s) caused the alarm.
4. Go to the sensor(s) and look for the reason the sensor tripped.
5. Correct the condition that caused the detector to sense smoke.
Silencing a False Fire Alarm
If the fire alarm is sounding due to a detector sensing burnt food or some other non-
emergency condition, follow these steps to stop the alarm:
1. Silence the fire alarm sounder by entering your User PIN code.
2. Review the alarm memory to determine which sensor(s) caused the alarm.
3. If the alarm restarts, there may still be smoke in the detector's sensor. Enter your
User PIN code again to stop the alarm. Fan the detector for 30 seconds to clear
the detector's sensor chamber.
4. After the problem has been corrected, clear the alarm history. (Fire sensors that
are still violated cannot be cleared from alarm history until the device returns to
normal operation. Carefully inspect the premises for danger if fire sensors remain
in alarm.)
63