Acknowledge And Clear Alert Notifications - Vivint Smart Hub Lite Getting Started User Manual

Acknowledge and Clear Alert
Notifications
Vivint continually monitors security sensors, smart home devices, and the
hub itself to ensure optimal performance and communicate timely status
information via the panel and apps. Whenever events or conditions are
detected that require your attention, the hub displays an Alert notification
(in the case of emergency alerts it also beeps) until the alert is
acknowledged.
[placeholder note: add a new graphic/screenshot here...]
The following components/conditions are monitored and can trigger an alert:
• Input power to the hub
• Hub communications
• Sensor communications
Acknowledge and clear alerts
When the Alert icon
to acknowledge it. After you acknowledge an alert, the hub will stop beeping.
You must resolve the issue that triggered the alert in order to completely clear it. For
example, you must replace sensor batteries in order to clear a sensor's low battery alert.
View system messages
In addition to alerts, the hub can receive system messages about software updates,
regional severe weather reports, etc.
When the Message icon
the message is critical, such as a severe weather alert, it will display pertinent details and
beep to further warn you of possible danger.
aaaa
displays, press the icon (in the app) and read the alert in order
displays, press the icon (in the app) and read the message. If
• Hub tampering
• Sensor tampering
• Hub and sensor batteries
29