Default Settings Documented For Sia Cp-01-2019 Compliance - Vivint Smart Hub Lite Getting Started User Manual

Default Settings Documented
for SIA CP-01-2019 Compliance
Several of the Vivint system's security-related feature settings are configurable (i.e.,
programmable) — by either the home owner or the Vivint technician — and their default
value is pre-set in order to ensure compliance with the security industry standard:
American National Standards Institute / Security Industry Association ANSI/SIA
CP-01-2019 (Security System Standard - Features for False Alarm Reduction)
Other features required for compliance are permanently implemented by default on the
hub — always enabled or turned on — and their settings cannot be changed (i.e., are
non-configurable or non-programmable).
This section provides a complete listing of both the configurable and non-configurable
settings (see table below) for the system's SIA CP-01-2019 features that interact directly
with the user — including the standard's relevant section number, feature name, default
value, configurable value range (if applicable), and cross-reference links to conceptual
and how-to information about that particular functionality documented in the Vivint
manual.
Quick Reference Table
Use the table below as a Quick Reference of default settings requiring documentation for
SIA CP-01-2019.
Standard Vivint Feature
Section # (SIA name)
Exit Delay (Exit
4.2.2.1
Time)
Progress Annunc. -
4.2.2.2 Disable for Silent
Exit ‡
Default Value Range
Value (if configurable)
60
45-120 seconds
seconds
Enabled N/A
57
Vivint Documentation
(if required)
See "Arm the Security
System" on page 13.
Also, see "Exit Delay (in
seconds 45-120)" on
page 36.
See "Arm the Security
System" on page 13.