Additional Information: Disarming - Vivint Smart Hub Lite Getting Started User Manual

Additional Information: Disarming

To prevent your home security service from triggering an alarm, the security services need
to be disarmed. Disarming turns off the home security protection part of the system for
sensors that are not 24-hour sensors. Disarming also stops any type of alarm in process.
The system should be disarmed from Stay Mode before exiting your home. The system
should be disarmed from Away Mode when entering your home. When disarming at the
hub, enter a valid User PIN. A wireless key fob can also be used to disarm the system.
Entering a User PIN is not required when disarming with a wireless key fob.
An IMPORTANT feature of the hub is its ability to warn you if an alarm has occurred
while you were away. If an alarm was triggered while the system was armed, the alarm
runs for a preset length of time then stops. When you enter to disarm the system, instead
of sounding the normal Entry Delay beeps, the hub sounds fast beeps to warn you that
an alarm has occurred.
WARNING: When you enter your home to disarm the system, if you hear fast repeated
beeps instead of the normal Entry Delay beeps, use extreme caution! An intruder may be
inside! Wait outside in an area visible to others and call law enforcement for assistance.
Quick Exit in Stay M ode
A system setting called Quick Exit may be displayed on the Security screen while the
system is armed in the Stay Mode.
Pressing the Quick Exit button starts a timer to allow someone to exit or enter through a
sensor-protected door programmed for delay without having to disarm the entire system.
When the timer runs out, the system returns to the normal Stay Mode.
The Quick Exit option is on by default, and can be turned on or off by your Vivint Field
Service Professional.
Disarm from Away M ode
The system should be disarmed from Away Mode when entering your home.
To disarm the system from Away Mode
1. Enter the home through a protected door.
2. The Disarm screen displays and the normal Entry Delay beeps sound.
3. Enter a valid User PIN to disarm the system.
19