Vivint Smart Hub Lite Getting Started User Manual page 47

NOTE: The auto stay feature does not switch the system to Stay Mode if the system is
armed to Away Mode using a key fob remote or remotely armed via telephone or
computer.
Key Fob Settings
Key Fob Arm/Disarm Sound
The system can be set so when it's armed or disarmed by a wireless key fob, a beep will
sound through the internal and external sounders to indicate that the key fob's signal
was received.
This helps in installations where the hub is not visible or there are no other system status
indications at the key fob's location. The default setting is Off.
Off
On
Key Fob Disarm After Sound
The system can be set so when it's disarmed with a wireless key fob after an alarm has
occurred, a special series of beeps will sound through the internal and external sounders.
This option serves as an alert to warn you to approach the home with caution as an
intruder may still be present. The default setting is Off.
Off
On
IMPORTANT: The system can be set so when it's disarmed with a wireless key fob after
an alarm has occurred, a special series of beeps will sound through the internal and
external sounders. This option serves as an alert to warn you to approach the home with
caution as an intruder may still be present.
Arm With No Entry Delay
Key fobs can be set to arm the security system with or without an Entry Delay. The
default setting is Disabled.
The default setting allows the fob to arm the system with an Entry Delay. To set the fob
to arm the system without an Entry Delay, the installer selects enabled.
Key Fob Emergency Option
To trigger an emergency alarm using a key fob, press the Away button and Disarm
button at the same time for 5 seconds. (This option must be enabled by the installer.)
42