Vivint Smart Hub Lite Getting Started User Manual page 60

55
NOTES
NOTE: For information about the licensing of third-party software used on this hub
device, go to: vivint.com/legal/fcc and click on the link at the bottom of the page.
NOTE: Some cities and municipalities may require an alarm system permit. The person
who installs the system is responsible to know these requirements OR to check with the
local authorities before installing the system.
NOTE: Many insurance companies offer discounts on homeowners and renters policies
when a security system is installed. Discounts vary with different companies and
generally increase in savings with an increase in the level of protection. Inform the user
to ask their insurance agent about savings available.
NOTE: This security system is also Listed for use as a household fire warning system,
there must be at least one smoke detector configured into the system. Many insurance
companies require meeting these requirements to qualify for a discount. Use only
approved smoke detectors.
NOTE: Fire warning systems (including smoke and/or CO alarms) installed in the United
States must be installed in accordance with Chapter 29 of the National Fire Alarm and
Signaling Code ANSI/NFPA 72 (National Fire Protection Association, Batterymarch
Park, Quincy, MA 02269), and the National Electrical Code ANSI/NFPA 70.
NOTE: Test fire warning systems at least once per week.
NOTE: Home automation features and functionality are not covered or evaluated under
the requirements of the following UL Standards: UL 985 (Standard for Household Fire
Warning System Units) and UL 1023 (Standard for Household Burglar Alarm System
Units).
IMPORTANT: Failure to install the hub and all connected sensors and devices in
accordance with the requirements contained in this guide voids the Listed mark.
IMPORTANT: For UL 1023 (Standard for Household Burglar Alarm System Units)
compliance, the hub cannot be configured to place a direct call to a police station.