Step 1. Inspect The Shipment - Agilent Technologies 83438A User Manual

Getting Started

Step 1. Inspect the Shipment

Step 1. Inspect the Shipment

1 Verify that all components ordered have arrived by comparing the shipping
forms to the original purchase order. Inspect all shipping containers.
If your shipment is damaged or incomplete, save the packing materials and
notify both the shipping carrier and the nearest Agilent Technologies service
office. Agilent Technologies will arrange for repair or replacement of
damaged or incomplete shipments without waiting for a settlement from the
transportation company. Notify the Agilent Technologies customer engineer
of any problems.
2 Make sure that the serial number and options listed on the instrument's rear-
panel label match the serial number and options listed on the shipping
document. The following figure is an example of the rear-panel serial number
label:
Table 1-1. Agilent 83438A Options
Option Description
009 Built-in polarizer
011 Diamond HMS-10 fiber-optic input connector interface
013 DIN 47256 fiber-optic input connector interface
014 ST fiber-optic input connector interface
017 SC fiber-optic input connector interface
022 Angled contact fiber-optic output interface
1-4