RH Baby&child CHANGING TABLE Assembly Instructions

IMPORTANT SAFETY INSTRUCTIONS

1. Please read all instructions carefully before assembling.
2. For your safety, assembly by two or more adults is strongly recommended.
3. Keep instructions for future use.
4. Use only vendor-supplied hardware to assemble. Using unauthorized hardware could
jeopardize the structural integrity of the item.
ASSEMBLY INSTRUCTIONS
Check the table leveling and adjust the levelers at the bottom of the legs
if necessary. See FIGURE 1.

ASSEMBLY INSTRUCTIONS BY WALL TYPE


DRYWALL WITH STUDS: Use screws to affix to studs, and use
hollow wall anchors and screws to affix to drywall. See FIGURE A.

DRYWALL WITHOUT STUDS: Use toggle bolt and screws to affix
to drywall. See FIGURE B.
C H A N G I N G T A B L E - A S S E M B L Y I N S T R U C T I O N S

TOOLS NEEDED

Phillips-head Screwdriver (Not included)

HARDWARE INCLUDED

NO. ITEM
1
2
Steel Aircraft Cable
3
4
5
6
7
Leveler
FIGURE A
DRYWALL W/STUDS
DESCRIPTION QTY.
Metal Bracket 2 pcs.
Clevis Pin 2 pcs.
1 pc.
Hair Pin 2 pcs.
Short Screw
2 pcs.
Long Screw
2 pcs.
2 sets
Toggle Bolt
FIGURE 1
FIGURE B
DRYWALL W/O STUDS
1 2 /