Specifying Paper Type And Thickness Settings - Ricoh IM CW2200 User Manual

8. Adding Paper and Ink
6. Press [Custom] from the list shown.
7. Press the value in the "A" or "B" field, and then enter the new value.
Specify the values within the range of numbers inside "< >", and then press [Done].
8. Press [OK] three times.
9. After completing the configuration, press [Home] (

Specifying Paper Type and Thickness Settings

If the print settings and the loaded paper that are used for a print job do not match, a mismatch error
occurs.
Check and specify the paper settings before you start printing.
On the printer driver
Check the settings of paper input location and paper type on the printer driver and make sure the
settings match the loaded paper.
On the control panel
1. Press [Settings] on the Home screen.
2. Press [Paper Input Location/Paper Settings].
3. Press [Paper Size/Paper Type]
164
).
D0CWPA5120
[Paper Size/Paper Type].