Ricoh IM CW2200 User Manual page 97

4. Click (IP), and configure the information of the machine.
• Address: Enter the IP address of the machine.
• Protocol: Select [HP Jetdirect - Socket].
• Use: Check that the machine name is displayed. If "Generic PostScript Printer" is displayed,
the entered IP address may not be correct.
When "Generic PostScript Printer" is displayed even though the IP address is correct
Check the network connection of the machine and the computer, and then register again.
• When the machine is connected to a wired LAN
Check that the cable is connected to the machine correctly.
• When the machine is connected to a Wireless LAN
Check the wireless signal status on the machine, and check whether there are any
problems.
5. Click [Add].
The progress screen is displayed.
• If the progress screen does not close after a while, click [Configure...] and configure the
option configuration of the printer. For the procedure of the option configuration, see
page 96 "Specifying the Option Settings".
Installing the Printer Driver for Network Connection (macOS)
D0DXMA6204
95