Ricoh IM CW2200 User Manual page 60

3. Copy
2. Select the color mode on the Copy screen.
3. Press [ ] or [ ] in [Quantity] to specify the number of copies.
You can enter this using the keyboard after pressing [Quantity] or a number.
4. Press the paper input location select key, and then select the paper input location and
paper size to use as necessary.
• When you select [Auto Paper Select], the paper suitable for the original is selected
automatically. When the orientations of the original and paper in the paper input location do
not match, the machine rotates the copied image 90 degrees automatically.
• If the size of the original is not detected properly or when you make a copy on paper of a
special size, specify the paper input location in which the paper to use is loaded.
• When making full size copies in A4 or B4 JIS size paper using the Rotate Copy function,
place originals in the
• When you specify the length to cut the paper loaded in the paper input location, see the
following section:
page 60 "Specifying the Length of Copy Paper Cut"
5. Press [Original Orientation], and then specify the original orientation.
• If the key is not displayed, select it from [Original Setting].
• When you place the original in a readable orientation, this setting is not necessary if
[Readable Direction] is displayed on the key.
58
DZC207
orientation and load paper in the orientation.