Table of Contents
Advertisement
Logger Defaults and Details
Defaults for several of the logger's variables can be set using Insight. Select
Tools > Options > Logger (and click 'Advanced' for some features):
Default number of probes.
Frequency of the local electricity supply.
Ability to store pre-trigger data (data recorded before the trigger point
specified during reset; maximum c. 100 data points).
On this Logger tab of the Global Options dialog you can also find the model
and identification number of the logger, and enter calibration information
and be warned when re-calibration is due.
For full details of using the dialog, see Insight's online Help.
For further features of the Insight software – particularly data analysis and the use
of process files – see the online Help system (on Insight's menu bar,
28
Using Insight Software
select Help > Contents).
DATAPAQ XDL12
Advertisement
Table of Contents
