Graphics Configuration; Power Management - Asus Q670EI-IM-A Manual

Configuration options: [Enabled] [Disabled]
The following item appears only when you set Power Limit 1 Override to
[Enabled].
Power Limit 1
Allows you to configure Power Limit 1 value in milliwatts.
Power Limit 2 Override
Allows you to enable or disable Power Limit 2 Override.
Configuration options: [Enabled] [Disabled]
The following item appears only when you set Power Limit 2 Override to
[Enabled].
Power Limit 2
Allows you to configure Power Limit 2 value in milliwatts.
3.3.5 Graphics Configuration
This item allows you to select a primary display from IGFX and PEG graphical
devices.
Primary Display
Allows you to select which of the IGFX/PEG Graphics devices should be the
primary display or select SG for switchable Gfx.
Configuration options: [Auto] [IGFX] [PEG Slot]
Internal Graphics
Configuration options: [Auto] [Disabled] [Enabled]
[Auto]
[Disabled]
[Enabled]
RC6 (Render Standby)
Allows you to enable or disable render standby support.
Configuration options: [Disabled] [Enabled]
3.3.6

Power Management

This item allows you to configure system ACPI parameters.
Enable ACPI Auto Configuration
Allows you to enable or disable BIOS ACPI Auto Configuation.
Configuration options: [Disabled] [Enabled]
Enable Hibernation
Enables or disables system ability to Hibernate (0S/S4 Sleep State).
Configuration options: [Disabled] [Enabled]
3-6
Keeps IGFX enabled base on the setup options.
Disables internal graphics.
Enables internal graphics.
Q670EI-IM-A