Graphics Configuration - Asus H610A-IM-A Manual

CPU Power Management Control
This item allows you to manage and configure the CPU's power.
Intel(R) SpeedStep(tm)
This item allows your system to support more than two frequency ranges.
Configuration options: [Disabled] [Enabled]
Intel(R) Speed Shift Technology
This item allows you to enable or disable Intel(R) Speed Shift Technology
support. When enabled, CPPC v2 interface allows hardware controlled
P-state. Configuration options: [Disabled] [Enabled]
Turbo Mode
This item allows you to enable or disable Turbo Mode for your processor.
Configuration options: [Enabled] [Disabled]
CPU C states
[Enabled]
[Disabled]
Enhanced C-states
[Disabled]
[Enabled]
Power Limit 1 Override
[Disabled]
[Enabled]
Power Limit 2 Override
[Disabled]
[Enabled]
Power Limit 2
This item allows you to input the value of power limit 2 in milliwatts. If the
value is 0, BIOS will program this value as 1.25 times of Processor Base
Power (TDP). For 12.50W, enter 12500. Processor applies control policies so
that the package power does not exceed this limit.
3.3.4

Graphics Configuration

Allows you to select a primary display from IGFX, PEG and PCI graphical devices.
Primary Display
Allows you to select which of the IGFX/PEG/PCI Graphics device should be the
Primary Display. Configuration options: [Auto] [IGFX] [PEG Slot] [PCH PCI]
Internal Graphics
[Auto]
3-4
Enables the CPU C states.
Disables the CPU C states.
Disables enhanced C1 state.
Enables enhanced C1 state.
Disables power limit 1.
Enables power limit 1.
Disables power limit 2.
Enables power limit 2.
Keep IGFX enabled base on the setup options.
H610A-IM-A