Introduction; Manual Description; Product Requirements; Barcode Configurability - Marson MT1 User Manual

1. Introduction

1.1 Manual Description

This user's manual mainly provides instruction on configuring MT1. By
scanning the configuration barcodes in this manual, you can change MT1's
interface, reading mode, data format and so on. The appendix lists the default
configurations of MT1. In most cases, user can use MT1 without further
configuration.

1.2 Product Requirements

Model
MT1

1.3 Barcode Configurability

Scanning below configuration barcodes will allow/prohibit user to change
settings by scanning configuration barcodes in this manual.
Enable Barcode Configurability*
Scanning below configuration barcodes will allow/prohibit configuration
barcode data output.
Enable Config Barcode Data Output
___________________________________________________________________________________
Firmware Version
V2.4.0.29.13 or up
Disable Barcode Configurability
Disable Config Barcode Data Output
12
MT1 User's Manual V1.0
Interface
UART
USB HID
USB VCP
HID POS
*