1. Manuals
  2. Brands
  3. Marson Manuals
  4. Scanner
  5. MT8200H
  6. User manual

Marson MT8200H User Manual

2d handheld scanner
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
MT8200H User's Manual V2.1
MT8200H
2D Handheld Scanner
User's Manual
Version 2.1
DATE: 2023/11/24

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MT8200H and is the answer not in the manual?

Questions and answers

Related Manuals for Marson MT8200H

Summary of Contents for Marson MT8200H

  • Page 1 MT8200H User’s Manual V2.1 MT8200H 2D Handheld Scanner User’s Manual Version 2.1 DATE: 2023/11/24...

  • Page 2: Table Of Contents

    MT8200H User’s Manual V2.1 Table of Content CHAPTER 1 INTRODUCTION ............................... 7 .................................... 7 PECIFICATIONS ..................................9 EEPER NDICATION LED I .................................... 9 NDICATION CHAPTER 2 GENERAL SETTINGS ............................ 10 ) ..........................10 ARCODE ONFIGURABILITY ETUP ..................................10 ACTORY EFAULT ..................................
  • Page 3 MT8200H User’s Manual V2.1 Auto-sensing Mode – Magnetic Switch ..........................25 LED Auto-Off Timeout ................................25 CHAPTER 4 DATA FORMAT ............................... 26 ID ....................................... 26 ID ......................................26 ....................................30 ENGTH ....................................30 REAMBLE ....................................30 OSTAMBLE Clear Preamble/Postamble ..............................31 ....................................
  • Page 4 MT8200H User’s Manual V2.1 39 ...................................... 42 Enable/Disable Code 39 ..............................42 Verification ..................................... 42 Start/Stop ....................................42 Full ASCII Code39 ................................43 Code39 Min/Max Length ..............................43 32 ...................................... 44 Enable/Disable Code 32 ..............................44 93 ...................................... 45 Enable/Disable Code 93 ..............................45 Code 93 Min/Max Length ..............................
  • Page 5 MT8200H User’s Manual V2.1 GS1 D ..................................... 58 Enable/Disable GS1 DataBar ............................. 58 GS1 D ................................58 IMITED Enable/Disable GS1 DataBar Limited ..........................58 GS1 D ................................58 XPANDED Enable/Disable GS1 DataBar Expanded .......................... 58 GS1 DataBar Expanded Min/Max Length ......................... 59 GS1 C ..................................
  • Page 6 MT8200H User’s Manual V2.1 Enable/Disable MaxiCode ..............................70 MaxiCode Min/Max Length..............................70 ) ............................71 HINESE ENSIBLE Enable/Disable Chinese Sensible Code ........................... 71 Chinese Sensible Code Min/Max Length .......................... 71 A ..................................... 72 ODABLOCK Enable/Disable Codablock A .............................. 72 Codablock A Min/Max Length ............................. 72 F ....................................

  • Page 7: Chapter 1 Introduction

    1D and 2D barcodes. With MT8200H at hand user can literally scan any barcode on any surface in any condition. MT8200H has many features that make scanning barcode easier and more comfortable such as mobile barcode readability, ambient light immunity and ergonomic design.
  • Page 8 MT8200H User’s Manual V2.1 Pitch Angle ±45° Skew Angle ±45° Roll Angle 360° Print Contrast Ratio Width of Field 116mm (13Mil Code39) 5Mil Code 39: 36 ~ 159mm 13Mil UPC: 46 ~ 325mm Typical D.O.F 20Mil QR Code: 38 ~ 248mm (Environment: 800 lux) 6.67Mil PDF417: 36 ~ 132mm...

  • Page 9: Beeper Indication

    MT8200H User’s Manual V2.1 Chinese Sensible Code (Han Xin) Australian Post, British Post, Canadian Post, China Post, Japanese Post, Korea Postal Codes Post, Netherlands Post, Planet Code, Postnet Regulatory Functional after 4KV contact, 8KV air discharge EMC/RF Safety Approval EN/IEC62471 (Exempt Group) Environmental RoHS 2.0...

  • Page 10: Chapter 2 General Settings

    MT8200H User’s Manual V2.1 Chapter 2 General Settings Barcode Configurability (Setup Code) Scanning below configuration barcodes will allow/prohibit user to change settings by scanning configuration barcodes in this manual. Enable Barcode Configurability* Disable Barcode Configurability Factory Default Scanning below configuration barcode will reset all parameters to factory default settings (the ones...

  • Page 11: Good Read Indicator

    MT8200H User’s Manual V2.1 Good Read Indicator Beep Tone Beep Low (2.0KHz) Beep Medium (2.7KHz)* Beep High (4.0KHz) Vibrator Off* Indicator LED...

  • Page 12: Data Format

    MT8200H User’s Manual V2.1 Data Format UTF-8 to Unicode Conversion Disable UTF-8 to Unicode* Enable UTF-8 to Unicode (Word) Country Code Page West European Latin* Japanese, Shift-JIS Japanese, Shift-JIS (Notepad / Excel) (Word) Traditional Chinese, Big5 Traditional Chinese, Big5 (Notepad / Excel) (Word) Note: Code pages define the mapping of character codes to characters.

  • Page 13: Ht/Cr/Esc Converts To Tab/Enter/Escape

    MT8200H User’s Manual V2.1 HT/CR/ESC Converts to TAB/ENTER/ESCAPE Off* Note: 1. By default, HT [$I], CR [$M] and ESC [%A] is transmitted as <0x09>, <0x0D> and <0x1B> respectively. 2. When enabled, HT [$I], CR [$M] and ESC [%A] is transmitted as <TAB>, <ENTER> and <ESCAPE>...
  • Page 14 MT8200H User’s Manual V2.1 Disable Output Note: Control code (0x01 ~ 0x1F) can be sent by two methods: (1) Ctrl Mode: A barcode of “A<HT>F” (0x41/0x09/0x46) is scanned, the output sequence is: a. Enter “A” – Press A key b. Enter “Ctrl + I” – Since 0x09 corresponds to “CtrI + I”, virtual keyboard will press and hold Ctrl key, press I key, and release Ctrl key and I key c.

  • Page 15: Numeric Key

    MT8200H User’s Manual V2.1 Ctrl+m Alt+0+0+1+3 Ctrl+n Alt+0+0+1+4 Ctrl+o Alt+0+0+1+5 Ctrl+p Alt+0+0+1+6 Ctrl+q Alt+0+0+1+7 Ctrl+r Alt+0+0+1+8 Ctrl+s Alt+0+0+1+9 Ctrl+t Alt+0+0+2+0 Ctrl+u Alt+0+0+2+1 Ctrl+v Alt+0+0+2+2 Ctrl+w Alt+0+0+2+3 Ctrl+x Alt+0+0+2+4 Ctrl+y Alt+0+0+2+5 Ctrl+z Alt+0+0+2+6 Ctrl+[ Alt+0+0+2+7 Ctrl+\ Alt+0+0+2+8 Ctrl+] Alt+0+0+2+9 30 Ctrl+Shift+6 Alt+0+0+3+0...

  • Page 16: Opos

    MT8200H User’s Manual V2.1 OPOS Off* Note: To function properly with OPOS, the host PC must be installed with OPOS driver or demo program, which is available from our website. Capital Lock Mode Capslock Off* Capslock On Capslock Free Note: When in Capslock On, the scanner inverses case or cancels out the Capslock state of keyboard.

  • Page 17: Imaging Settings

    MT8200H User’s Manual V2.1 Imaging Settings Inverse Barcode Disable Inverse Barcode* Enable Inverse Barcode Centering Disable Centering* Enable Centering Note: When enabled, the scanner only decodes the barcodes marked by aimer dot.

  • Page 18: Chapter 3 Interface

    MT8200H User’s Manual V2.1 Chapter 3 Interface USB HID USB HID Keyboard Layout English (US)* English (UK) Danish Spanish Hungarian (QWERTZ) Hungarian (QWERTY) Canadian French Dutch...
  • Page 19 MT8200H User’s Manual V2.1 Italian French German Swiss German Swiss French Swedish Czech (QWERTZ) Czech (QWERTY) Norwegian Belgian Portuguese Slovak Brazilian (QWERTY) Canadian (Traditional)

  • Page 20: Intercharacter Delay

    MT8200H User’s Manual V2.1 Japanese Alt Code Intercharacter Delay The configurable range is from 0 to 255ms. The larger the number, the longer the delay. Set Intercharacter Delay (Default = 0ms) Example: Set Intercharacter Delay to 8ms Step1: Scan Set Intercharacter Delay Step2: Scan “0”...

  • Page 21: Usb Vcp

    MT8200H User’s Manual V2.1 USB VCP USB VCP Baud Rate 1200 2400 4800 9600* 19200 38400 57600 115200...

  • Page 22: Data Bits & Parity

    MT8200H User’s Manual V2.1 Data Bits & Parity 8 Bits Even 8 Bits Odd 8 Bits Space 8 Bits Mark 8 Bits None* 7 Bits Even 7 Bits Odd 7 Bits Space 7 Bits Mark Stop Bits 1 Stop Bit*...

  • Page 23: Handshaking

    MT8200H User’s Manual V2.1 Handshaking None* RTS enable at Power On RTS enable with Communication ACK/NAK Off*...

  • Page 24: Chapter 4 Reading Mode

    MT8200H User’s Manual V2.1 Chapter 4 Reading Mode Trigger Mode In Trigger Mode the LED will stay on when the trigger is pressed and held, and will turn off automatically once a barcode is read or LED Auto-Off timeout expires if LED Auto-Off Control is enabled.

  • Page 25: Auto-Sensing Mode - Magnetic Switch

    MT8200H User’s Manual V2.1 Auto-sensing Mode – Magnetic Switch When magnetic switch is on, the scanner automatically enters Auto-sensing Mode when placed on Auto Stand (w/ magnet), and resumes Trigger Mode when held on hand. When magnetic switch is off, the scanner will always stay in Auto-sensing Mode.

  • Page 26: Chapter 4 Data Format

    MT8200H User’s Manual V2.1 Chapter 4 Data Format By default data format is as follows: <Preamble> <Code ID> <Barcode Length> <Barcode Data> <Postamble> <Terminator> Code ID Disable Code ID* Enable Factory ID Enable AIM ID Enable Set ID Set ID Set ID can be 0 ~ 2 alphanumerics for each symbology.
  • Page 27 MT8200H User’s Manual V2.1 Set ID –Matrix 2 of 5 Set ID – Industrial 2 of 5 Set ID – Code 11 Set ID – MSI Plessey Set ID – EAN-13 Set ID – UPC-A Set ID – EAN-8 Set ID – UPC-E Set ID –...
  • Page 28 MT8200H User’s Manual V2.1 Set ID – NEC 2 of 5 Set ID – GS1 Composite Set ID – China Post Set ID – Korea Post Set ID – Australian Post Set ID – British Post Set ID – Canadian Post Set ID –...
  • Page 29 MT8200H User’s Manual V2.1 Set ID – QR Code / Micro QR Code Set ID – PDF417 Set ID – MicroPDF417 Set ID – Data Matrix Set ID – MaxiCode Set ID – Chinese Sensible Code (Han Xin) Set ID – Codablock A Set ID –...

  • Page 30: Data Length

    MT8200H User’s Manual V2.1 Data Length Send Data Length Off* Send Data Length On Preamble Preamble can be up to 16 bytes of data. Set Preamble Example: Set XYZ123 as Preamble Step 1: Scan “Set Preamble” Step 2: Scan “X” “Y” “Z” “1” “2” “3” in Appendix – Upper Case Alphabets & Numbers Step 3: Scan “Set Preamble”...

  • Page 31: Clear Preamble/Postamble

    MT8200H User’s Manual V2.1 Clear Preamble/Postamble Clear Preamble/Postamble Terminator None <LF> <CR>* <CR><LF> <TAB> <Space> <ESC> Note: 1. Default Terminator for USB HID interface = <CR> (or Enter) 2. Default Terminator for USB VCP interface = <CR><LF> 3. <CR><LF> or <LF> is treated as Enter for USB HID interface.

  • Page 32: Chapter 6 Symbologies

    MT8200H User’s Manual V2.1 Chapter 6 Symbologies General Settings Enable All Symbologies Disable All Symbologies Note: When all symbologies are disabled, configuration barcodes are still readable. UPC-A Enable/Disable UPC-A Enable UPC-A* Disable UPC-A Lead Digit (Number System) Not Send Lead Digit...

  • Page 33: Check Digit

    MT8200H User’s Manual V2.1 Check Digit Send Check Digit* Not Send Check Digit UPC-A Expand to EAN-13 Enable Expand UPC-A to EAN-13 Disable Expand UPC-A to EAN-13* Add On Supplement Enable 5-digit Supplement Disable 5-digit Supplement* Enable 2-digit Supplement Disable 2-digit Supplement*...

  • Page 34: Upc-E

    MT8200H User’s Manual V2.1 Enable Addenda Required Disable Addenda Required* Note: When Addenda Required is enabled, the scanner will only read an UPC-A barcode that has 2-digit or 5-digit addenda/supplement. UPC-E Enable/Disable UPC-E Enable UPC-E* Disable UPC-E Lead Digit (System Number)

  • Page 35: Upc-E Expand To Upc-A

    MT8200H User’s Manual V2.1 UPC-E Expand to UPC-A Enable UPC-E Expand to UPC-A Disable UPC-E Expand to UPC-A* Add On Supplement Enable 5-digit Supplement Disable 5-digit Supplement* Enable 2-digit Supplement Disable 2-digit Supplement* Enable Add A Space* Disable Add A Space...

  • Page 36: Enable/Disable Upc-E1

    MT8200H User’s Manual V2.1 Note: When Addenda Required is enabled, the scanner will only read an UPC-E barcode that has 2-digit or 5-digit addenda/supplement. Enable/Disable UPC-E1 Enable UPC-E1 Disable UPC-E1* EAN-8 Enable/Disable EAN-8 Enable EAN-8* Disable EAN-8 Check Digit Not Send Check Digit...

  • Page 37: Add On Supplement

    MT8200H User’s Manual V2.1 Add On Supplement Enable 5-digit Supplement Disable 5-digit Supplement* Enable 2-digit Supplement Disable 2-digit Supplement* Enable Add A Space* Disable Add A Space Enable Addenda Required Disable Addenda Required* Note: When Addenda Required is enabled, the scanner will only read an EAN-8 barcode that has 2-digit...

  • Page 38: Enable/Disable Ean-13

    MT8200H User’s Manual V2.1 EAN-13 Enable/Disable EAN-13 Enable EAN-13* Disable EAN-13 Check Digit Not Send Check Digit Send Check Digit* ISBN Enable ISBN Disable ISBN* Add On Supplement Enable 5-digit Supplement Disable 5-digit Supplement*...
  • Page 39 MT8200H User’s Manual V2.1 Enable 2-digit Supplement Disable 2-digit Supplement* Enable Add A Space* Disable Add A Space Enable Addenda Required Disable Addenda Required* Note: When Addenda Required is enabled, the scanner will only read an EAN-13 barcode that has 2-digit...

  • Page 40: Code 128

    MT8200H User’s Manual V2.1 Code 128 Enable/Disable Code 128 Enable Code 128* Disable Code 128 ISBT 128 Concatenation ISBT 128 Concatenation Off* ISBT 128 Concatenation On Code 128 Min/Max Length Set Min Length Set Max Length (Default = 01) (Default = 80) Example: Set Min Length as 8, Max Length as 12 for Code 128 Step1: Scan “Set Min Length”...

  • Page 41: Gs1-128

    MT8200H User’s Manual V2.1 GS1-128 Enable/Disable GS1-128 Enable GS1-128* Disable GS1-128 GS1-128 Min/Max Length Set Min Length Set Max Length (Default = 01) (Default = 80) Example: Set Min Length as 8, Max Length as 12 for GS1-128 Step1: Scan “Set Min Length”...

  • Page 42: C

    MT8200H User’s Manual V2.1 Code 39 Enable/Disable Code 39 Enable Code 39* Disable Code 39 Verification Disable CDV* CDV & Send CD CDV & Not Send CD Start/Stop Not Send Start/Stop* Send Start/Stop...

  • Page 43: Full Ascii Code39

    MT8200H User’s Manual V2.1 Full ASCII Code39 Enable Full ASCII Code39* Disable Full ASCII Code39 Code39 Min/Max Length Set Min Length Set Max Length (Default = 01) (Default = 48) Example: Set Min Length as 8, Max Length as 12 for Code 39 Step1: Scan “Set Min Length”...

  • Page 44: Code 32

    MT8200H User’s Manual V2.1 Code 32 Enable/Disable Code 32 Enable Code 32 Disable Code 32* Notw: Please make sure Code39 is enabled with verification disabled before enabling Code32.

  • Page 45: Code 93

    MT8200H User’s Manual V2.1 Code 93 Enable/Disable Code 93 Enable Code 93* Disable Code 93 Code 93 Min/Max Length Set Min Length Set Max Length (Default = 01) (Default = 80) Example: Set Min Length as 8, Max Length as 12 for Code 93 Step1: Scan “Set Min Length”...

  • Page 46: Code 11

    MT8200H User’s Manual V2.1 Code 11 Enable/Disable Code 11 Enable Code 11 Disable Code 11* Verification CDV & Send CD (1 Digit)* CDV & Send CD (2 Digits) Code 11 Min/Max Length Set Min Length Set Max Length (Default = 04)

  • Page 47: Codabar (Nw-7)

    MT8200H User’s Manual V2.1 Codabar (NW-7) Enable/Disable Codabar Enable Codabar* Disable Codabar Verification Disable CDV* CDV & Send CD CDV & Not Send CD Start/Stop Send Start/Stop Not Send Start/Stop*...

  • Page 48: Codabar Min/Max Length

    MT8200H User’s Manual V2.1 Codabar Min/Max Length Set Min Length Set Max Length (Default = 04) (Default = 60) Example: Set Min Length as 8, Max Length as 12 for Codabar Step1: Scan “Set Min Length” Step2: Scan “0” “8” in Appendix – Numbers Step3: Scan “Set Min Length”...

  • Page 49: Interleaved 2 Of 5

    MT8200H User’s Manual V2.1 Interleaved 2 of 5 Enable/Disable Interleaved 2 of 5 Enable Interleaved 2 of 5* Disable Interleaved 2 of 5 Verification Disable CDV* CDV & Send CD CDV & Not Send CD...

  • Page 50: Interleaved 2 Of 5 Min/Max Length

    MT8200H User’s Manual V2.1 Interleaved 2 of 5 Min/Max Length Set Min Length Set Max Length (Default = 04) (Default = 80) Example: Set Min Length as 8, Max Length as 12 for Interleaved 2 of 5 Step1: Scan “Set Min Length”...

  • Page 51: Standard 2 Of 5 (Iata)

    MT8200H User’s Manual V2.1 Standard 2 of 5 (IATA) Enable/Disable Standard 2 of 5 Enable Standard 2 of 5 Disable Standard 2 of 5* Standard 2 of 5 Min/Max Length Set Min Length Set Max Length (Default = 04) (Default = 48) Example: Set Min Length as 8, Max Length as 12 for Standard 2 of 5 Step1: Scan “Set Min Length”...

  • Page 52: Matrix 2 Of 5

    MT8200H User’s Manual V2.1 Matrix 2 of 5 Enable Disable Matrix 2 of 5 Enable Matrix 2 of 5 Disable Matrix 2 of 5* Matrix 2 of 5 Min/Max Length Set Min Length Set Max Length (Default = 04) (Default = 48) Example: Set Min Length as 8, Max Length as 12 for Matrix 2 of 5 Step1: Scan “Set Min Length”...

  • Page 53: Industrial 2 Of 5

    MT8200H User’s Manual V2.1 Industrial 2 of 5 Enable/Disable Industrial 2 of 5 Enable Industrial 2 of 5 Disable Industrial 2 of 5* Industrial 2 of 5 Min/Max Length Set Min Length Set Max Length (Default = 04) (Default = 48) Example: Set Min Length as 8, Max Length as 12 for Industrial 2 of 5 Step1: Scan “Set Min Length”...

  • Page 54: Nec 2 Of 5

    MT8200H User’s Manual V2.1 NEC 2 of 5 Enable/Disable NEC 2 of 5 Enable NEC 2 of 5* Disable NEC 2 of 5 Verification Disable CDV* CDV & Send CD CDV & Not Send CD...

  • Page 55: Nec 2 Of 5 Min/Max Length

    MT8200H User’s Manual V2.1 NEC 2 of 5 Min/Max Length Set Min Length Set Max Length (Default = 04) (Default = 80) Example: Set Min Length as 8, Max Length as 12 for NEC 2 of 5 Step1: Scan “Set Min Length”...

  • Page 56: Msi Plessey

    MT8200H User’s Manual V2.1 MSI Plessey Enable/Disable MSI Plessey Enable MSI Plessey Disable MSI Plessey* Verification Disable CDV Single MOD10 & Not Send CD* Single MOD10 & Send CD Double MOD10 & Not Send CD Double MOD10 & Send CD MOD11/MOD10 &...

  • Page 57: Msi Plessey Min/Max Length

    MT8200H User’s Manual V2.1 MSI Plessey Min/Max Length Set Min Length Set Max Length (Default = 04) (Default = 48) Example: Set Min Length as 8, Max Length as 12 for MSI Plessey Step1: Scan “Set Min Length” Step2: Scan “0” “8” in Appendix – Numbers Step3: Scan “Set Min Length”...

  • Page 58: Gs1 Databar

    MT8200H User’s Manual V2.1 GS1 DataBar Enable/Disable GS1 DataBar Enable GS1 DataBar* Disable GS1 DataBar GS1 DataBar Limited Enable/Disable GS1 DataBar Limited Enable GS1 DataBar Limited Disable GS1 DataBar Limited* GS1 DataBar Expanded Enable/Disable GS1 DataBar Expanded Enable GS1 DataBar Expanded...

  • Page 59: Gs1 Databar Expanded Min/Max Length

    MT8200H User’s Manual V2.1 GS1 DataBar Expanded Min/Max Length Set Min Length Set Max Length (Default = 04) (Default = 74) Example: Set Min Length as 8, Max Length as 12 for GS1 DataBar Expanded Step1: Scan “Set Min Length”...

  • Page 60: Upc/Ean Version Gs1 Composite Required

    MT8200H User’s Manual V2.1 UPC/EAN Version GS1 Composite Required UPC/EAN Version GS1 Composite Required UPC/EAN Version GS1 Composite Not Required* Note: When UPC/EAN Version GS1 Composite Required is enabled, the scanner will only read an UPC/EAN barcode with GS1 Composite format.

  • Page 61: Korea Post

    MT8200H User’s Manual V2.1 Step6: Scan “Set Max Length” Note: Configurable range for Min/Max Length is 01 ~ 80. Korea Post Enable/Disable Korea Post Enable Korea Post Disable Korea Post* Check Digit Send Check Digit Not Send Check Digit* Korea Post Min/Max Length...

  • Page 62: Other Postal Codes

    MT8200H User’s Manual V2.1 Step6: Scan “Set Max Length” Note: Configurable range for Min/Max Length is 01 ~ 48. Other Postal Codes Enable/Disable Other Postal Codes Other Postal Codes Code Option Disable Other Postal Codes Austrialian InfoMail Japanese KIX (Netherlands)

  • Page 63: Planet Code

    MT8200H User’s Manual V2.1 Planet + Postnet + Intelligent Mail Planet + Postal-4i + Intelligent Mail Postnet + Postal-4i + Intelligent Mail Planet + Postal-4i + Posnet with B Fields Planet + Intelligent Mail + Posnet with B Fields Postal-4i + Intelligent Mail + Posnet with B Fields...

  • Page 64: Australian Post

    MT8200H User’s Manual V2.1 Australian Post Interpretation This option controls what interpretation is applied to customer fields in Australian 4-State symbols. By default, interpretation is Bar Output (Code = 0) Australian Post Interpretatioin Code Option Bar Output Numeric N Table...

  • Page 65: Qr Code / Micro Qr Code

    MT8200H User’s Manual V2.1 QR Code / Micro QR Code Enable/Disable QR Code / Micro QR Code Enable QR Code / Micro QR Code* Disable QR Code / Micro QR Code QR Code / Micro QR Code Min/Max Length Set Min Length...

  • Page 66: Data Matrix

    MT8200H User’s Manual V2.1 Data Matrix Enable/Disable Data Matrix Enable Data Matrix* Disable Data Matrix Data Matrix Min/Max Length Set Min Length Set Max Length (Default = 0001) (Default = 3116) Example: Set Min Length as 8, Max Length as 12 for Data Matrix.

  • Page 67: Pdf417

    MT8200H User’s Manual V2.1 PDF417 Enable/Disable PDF417 Enable PDF417* Disable PDF417 PDF417 Min/Max Length Set Min Length Set Max Length (Default = 0001) (Default = 2750) Example: Set Min Length as 8, Max Length as 12 for PDF417. Step1: Scan “Set Min Length”...

  • Page 68: Micropdf417

    MT8200H User’s Manual V2.1 MicroPDF417 Enable/Disable MicroPDF417 Enable MicroPDF417 Disable MicroPDF417* MicroPDF417 Min/Max Length Set Min Length Set Max Length (Default = 0001) (Default = 0366) Example: Set Min Length as 8, Max Length as 12 for MicroPDF417. Step1: Scan “Set Min Length”...

  • Page 69: Aztec

    MT8200H User’s Manual V2.1 Aztec Enable/Disable Aztec Enable Aztec* Disable Aztec Aztec Min/Max Length Set Min Length Set Max Length (Default = 0001) (Default = 3832) Example: Set Min Length as 8, Max Length as 12 for Aztec. Step1: Scan “Set Min Length”...

  • Page 70: Maxicode

    MT8200H User’s Manual V2.1 MaxiCode Enable/Disable MaxiCode Enable MaxiCode* Disable MaxiCode MaxiCode Min/Max Length Set Min Length Set Max Length (Default = 0001) (Default = 0150) Example: Set Min Length as 8, Max Length as 12 for MaxiCode. Step1: Scan “Set Min Length”...

  • Page 71: Chinese Sensible Code (Han Xin)

    MT8200H User’s Manual V2.1 Chinese Sensible Code (Han Xin) Enable/Disable Chinese Sensible Code Enable Chinese Sensible Code Disable Chinese Sensible Code* Chinese Sensible Code Min/Max Length Set Min Length Set Max Length (Default = 0001) (Default = 4000) Example: Set Min Length as 8, Max Length as 12 for Chinese Sensible Code.

  • Page 72: Codablocka

    MT8200H User’s Manual V2.1 Codablock A Enable/Disable Codablock A Enable Codablock A Disable Codablock A* Warning: Once enabled, Code 39 will be automatically disabled to reduce the risks of mistakenly decoding a damaged Codablock A as a Code 39 symbol.

  • Page 73: Codablockf

    MT8200H User’s Manual V2.1 Codablock F Enable/Disable Codablock F Enable Codablock F Disable Codablock F* Note: When Codablock F and Code 128 are both enabled, there is some risks of mistakenly decoding a damaged Codablock F symbol as a Code 128 symbol. Therefore, whenever possible, Code 128 should be disabled when Codablock F is enabled.

  • Page 74: Chapter 7 Appendix

    MT8200H User’s Manual V2.1 Chapter 7 Appendix Appendix – Numbers...

  • Page 75: Appendix - Upper Case Alphabets

    MT8200H User’s Manual V2.1 Appendix – Upper Case Alphabets...
  • Page 76 MT8200H User’s Manual V2.1...

  • Page 77: Appendix - Lower Case Alphabets

    MT8200H User’s Manual V2.1 Appendix – Lower Case Alphabets...
  • Page 78 MT8200H User’s Manual V2.1...

  • Page 79: Appendix - Control Codes

    MT8200H User’s Manual V2.1 Appendix – Control Codes...
  • Page 80 MT8200H User’s Manual V2.1...

  • Page 81: Appendix - Symbols

    MT8200H User’s Manual V2.1 Appendix – Symbols &...
  • Page 82 MT8200H User’s Manual V2.1 < > “ ‘...
  • Page 83 MT8200H User’s Manual V2.1...

  • Page 84: Appendix - Function Keys

    MT8200H User’s Manual V2.1 Appendix – Function Keys Home Enter (Numeric Key)

  • Page 85: Appendix - Navigation Keys

    MT8200H User’s Manual V2.1 Appendix – Navigation Keys Cursor Left Cursor Right Cursor Up Cursor Down Page Up Page Down Back Tab Enter...

  • Page 86: Appendix - Modifier Keys

    MT8200H User’s Manual V2.1 Appendix – Modifier Keys Alt (Left) make *1 Alt (Left) break Alt (Right) make Alt (Right) break Shift (Left) make *2 Shift (Left) break Shift (Right) make Shift (Right) break Win (Left) make Win (Left) break...

  • Page 87: Appendix - Abort

    MT8200H User’s Manual V2.1 Ctrl (Left) make *3 Ctrl (Left) break Ctrl (Right) make Ctrl (Right) break Note: *1: When “Alt (Left) make” is programmed, please scan “Alt (Left) break” to resume barcode setting. *2: When “Shift (Left) make” is programmed, please scan “Shift (Left) break” to resume barcode setting.

  • Page 88: Appendix - Default Table

    MT8200H User’s Manual V2.1 Appendix – Default Table Function Default Remark General Settings Barcode Configurability (Setup Code) Beep Tone Medium (2.7KHz) Vibrator Indicator LED Data Format UTF-8 to Unicode Conversion Country Code Page West European Latin HT/CR/ESC Converts to TAB/ENTER/ESCAPE...
  • Page 89 MT8200H User’s Manual V2.1 Code ID Disable Set ID Data Length Preamble Postamble Terminator Symbologies General Settings UPC-A Enable/Disable Lead Digit (Number System) Send Check Digit Send UPC-A Expand to EAN-13 5-digit Supplement 2-digit Supplement Add A Space Addenda Required...
  • Page 90 MT8200H User’s Manual V2.1 Add A Space Addenda Required Code 128 Enable/Disable ISBT 128 Concatenation Min Length Max Length GS1-128 Enable/Disable Min Length Max Length Code 39 Enable/Disable Verification Disable CDV Start/Stop Not Send Full ASCII Code39 Min Length Max Length...
  • Page 91 MT8200H User’s Manual V2.1 Min Length Max Length Standard 2 of 5 (IATA) Enable/Disable Min Length Max Length Matrix 2 of 5 Enable/Disable Min Length Max Length Industrial 2 of 5 Enable/Disable Min Length Max Length NEC 2 of 5...
  • Page 92 MT8200H User’s Manual V2.1 Max Length Korea Post Enable/Disable Check Digit Send Min Length Max Length Other Postal Codes Enable/Disable Planet Code Check Digit Not Send Postnet Code Check Digit Not Send Australian Post Interpretation Bar Output QR Code / Micro QR Code...
  • Page 93 MT8200H User’s Manual V2.1 Min Length 0001 Max Length 0600 Codablock F Enable/Disable Min Length 0001 Max Length 2048...

  • Page 94: Appendix - Factory Id And Aim Id Table

    MT8200H User’s Manual V2.1 Appendix – Factory ID and AIM ID Table Symbology Factory ID AIM ID AIM ID Modifier (m) Code 39 0,1,3,4,5,7 Full ASCII Code 39 Code 32 Codabar 0,1,2,6 Interleaved 2 of 5 0,1,3 NEC 2 of 5...
  • Page 95 MT8200H User’s Manual V2.1 Korea Post Australian Post British Post Canadian Post Japanese Post KIX (Netherlands) Post InfoMail Code Intelligent Code Planet Code Postal-4i Code Postnet Code PDF417 MicroPDF417 QR Code Data Matrix MaxiCode Codablock A Codablock F Aztec Chinese Sensible Code...

  • Page 96: Appendix - Ascii Table

    MT8200H User’s Manual V2.1 Appendix – ASCII Table Note: ASCII 0~31 are non-printable characters, ASCII 32~127 are printable characters. ASCII NUL (Null char.) SOH (Start of Header) STX (Start of Text) ETX (End of Text) EOT (End of Transmission) ENQ (Enquiry)
  • Page 97 MT8200H User’s Manual V2.1 # (Number Sign) $ (Dollar Sign) % (Percent) & (Ampersand) ` (Single Quote) ( (Right / Closing Parenthesis) ) (Right / Closing Parenthesis) * (Asterisk) + (Plus) , (Comma) - (Minus / Dash) . (Dot) / (Forward Slash) : (Colon) ;...
  • Page 98 MT8200H User’s Manual V2.1 [ (Left / Opening Bracket) \ (Back Slash) ] (Right / Closing Bracket) ^ (Caret / Circumflex) _ (Underscore) ‘ (Grave Accent)
  • Page 99 MT8200H User’s Manual V2.1 { (Left/ Opening Brace) | (Vertical Bar) } (Right/Closing Brace) ~ (Tilde) DEL (Delete)

  • Page 100: Version History

    MT8200H User’s Manual V2.1 Version History Date Description Issued 2023.11.14 FW: HM3-h-1.00.G1 S01 Shaw Initial Release 2023.11.24 Updated Control Code Table Shaw...

Table of Contents