Advertisement
Available languages
Available languages
Care and Cleaning
1.
This product contains no user serviceable parts. Refer service to qualified service personnel.
2.
Before cleaning, unplug the blender.
3.
Always wash immediately after use for easier cleaning. Don't let food dry on the jar assembly
as this will make cleaning difficult.
EN
4.
Pour a little warm soapy water into the jar and turn the knob to P position for a few seconds.
And then empty the jar.
5.
Dismantle all detachable parts. Lift the jar assembly off the motor unit. To detach the blade
assembly, turn it clockwise from the jar base bottom, and remove the seal ring (2) and blade
assembly (Fig.6). In addition, detach the jar cover seal ring (1) from the jar cover.
6.
Rinse the measure cup, lid, seal ring (1), jar unit, seal ring (2) and blade assembly by hands
or in a dishwasher and then dry. They are dishwasher safe components, but the temperature
setting shall not exceed 65 degrees.
7.
Brush the blade clean using warm soapy water, then rinse thoroughly under the tap. Don't
touch the sharp blades, handle carefully. Don't immerse the blade assembly in water. Leave
to dry upside down away from children.
8.
Wipe the motor unit with a damp cloth and dry thoroughly. Remove the stubborn spots by
rubbing with non-abrasive cleaner. If liquids spill into the motor unit; first unplug the unit, then
wipe with a damp cloth and dry thoroughly.
CAUTION
•
Do not immerse the motor unit in liquid to prevent the risk of electric shock!
•
Do not use rough scouring pads or cleansers on parts or finish!
Correct Disposal of this product
This marking indicates that this product should not be disposed with
other household wastes throughout the EU. To prevent possible harm
to the environment or human health from uncontrolled waste dispo-
sal, recycle it responsibly to promote the sustainable reuse of material
resources.
5
Champion ®
Makadamgatan 14 I 254 64 Helsingborg I Sweden
info@championnordic.se
Designed in Sweden I Assembled in China
Fig. 6
Advertisement
