Switching On/Off - Silvercrest SHGD 52 A1 Operating Instructions Manual

Switching on/off
NOTE
► The hotplates
(see section "Cleaning").
The appliance is secured with the catch
Press the hotplates
Now you can open the hair straightener all the way.
1) Insert the plug into a mains socket.
2) Push the ON/OFF switch
The indicator light
NOTE
► Steam generation requires a temperature of at least 170°C. At lower tempe-
ratures it is possible that hot water will come out of the upper hotplate
3) Select the temperature suitable for your hair by turning the temperature
control
–
150–170°C, low heat level, for fine hair,
not suitable for steam generation.
–
170–190°C, medium heat level, for normal hair,
suitable for steam generation.
–
190–210°C, high heat level, for thick hair,
suitable for steam generation.
–
210–230°C, highest heat level, for thick hair that is hard to style,
suitable for steam generation.
NOTE
► Select a high temperature for thick and strong hair.
► Select a lower temperature for fine and thin hair.
► If you are unsure, start with a lower temperature and increase the temperature
until you find the ideal temperature for you.
4) As soon as the hair straightener has reached the set temperature, the indicator
lamp
5) When you have finished styling your hair, push the ON/OFF switch
wards into the "0" (OFF) position. The indicator light
Pull out the plug and allow the appliance to cool down completely.
■ 36
│ GB
must be free of dirt. Clean them before use if required
together and pull the catch
forwards into the "I" (ON) position.
starts to flash red and the appliance heats up.
:
will light up permanently red.
.
out.
goes out.
.
back-
SHGD 52 A1