Safety Information - Silvercrest SHGD 52 A1 Operating Instructions Manual

Safety information

RISK OF ELECTRIC SHOCK
Connect the appliance only to mains power sockets supplying
►
a mains power voltage of 220–240 V ~ , 50/60 Hz.
Remove the plug from the mains power socket in case of
►
operating malfunctions and before you clean the appliance.
Always pull on the plug to disconnect the appliance from the
►
mains; never pull on the power cable itself.
Ensure that the power cable does not become wet or damp
►
during use. Route the cable in such a way that it cannot be
crushed or damaged.
If the appliance, the power cable or the plug are damaged,
►
arrange for them to be repaired by Customer Services to
avoid hazardous situations.
Do not use the appliance outdoors.
►
Do not use extension cables – they will make it difficult to
►
disconnect the appliance quickly in an emergency.
Never touch the appliance, the power cable or the power
►
plug with wet hands.
Do not kink or crush the power cable, and route the cable
►
so that it cannot be stepped on or tripped over.
Do not wrap the power cable around the appliance, and
►
protect it from being damaged. Under no circumstances
should the appliance be submersed in liquids or liquids be
allowed to penetrate the housing. Do not expose the appli-
ance to humidity and do not use it outdoors. If any liquid
gets into the housing, disconnect the appliance from the
mains power socket immediately and have it repaired by a
qualified technician.
SHGD 52 A1
31 ■
GB
│