Operation; Switching On/Off And Setting The Temperature; Selecting The Right Temperature - Silvercrest SHGB 58 A1 Operating Instructions Manual

Operation

Switching on/off and setting the temperature
Insert the plug into a mains power socket.
Press and hold the ON/OFF button
the appliance.
starts to heat up.
When you use the appliance for the first time:
Use the +/‒ buttons
a few minutes. The set temperature starts flashing on the LED display
soon as the selected temperature is reached, the LED display
permanently.
The first time the appliance heats up, a small amount of smoke and smell
may be generated: this is caused by production residues. This is normal and
is completely harmless. Ensure adequate ventilation of the room.
Use the +/‒ buttons
in 10°C increments. The set temperature starts flashing on the LED display
As soon as the selected temperature is reached, the LED display
permanently.
When you have finished styling your hair, turn off the appliance by pressing
the ON/OFF button
plug. Allow the appliance to cool down completely before storing it.

Selecting the right temperature

Type of hair
bleached/lightened hair
fine and colour-treated hair
normal to thick, untreated hair
Always start at the lowest temperature recommended for your hair type.
If required, raise the temperature in small steps to reach the optimum temperature
setting.
SHGB 58 A1
(= 150°C) flashes on the LED display
/ to set the maximum temperature of 210°C for
/ to set a temperature between 120 and 210°C
for approx. 1 second. Then disconnect the mains
Recommended temperature
120–140 °C
130–150 °C
150–210 °C
for approx. 1 second to switch on
; the appliance
lights up
GB │ MT
. As
.
lights up
│
35 ■