Safety Information - Silvercrest Quick Curl SHC 240 B2 Operating Instructions Manual

Hide thumbs Also See for Quick Curl SHC 240 B2:
Table of Contents

Advertisement

Available languages

Available languages

Safety information

RISK OF ELECTRIC SHOCK
Connect the appliance only to mains power sockets supplying
a mains power voltage of 110 – 240 V ∼, 50/60 Hz .
To prevent accidents, have defective plugs and/or power
cables replaced immediately by an authorised specialist
technician or our Customer Service department .
Remove the plug from the mains power socket in case of
operating malfunctions and before you clean the appliance .
Always pull on the plug to disconnect the appliance from the
mains; never pull on the power cable itself .
Do not kink or crush the power cable, and route the cable
so that it cannot be stepped on or tripped over .
Make sure that the power cable does not become wet or moist
during use . Route the cable in such a way that it cannot be
crushed or damaged .
To prevent risks, stop using the appliance immediately if it is
damaged .
Do not wrap the power cable around the appliance, and
protect it from being damaged .
Do not use extension cables – they will make it difficult to
disconnect the appliance quickly in an emergency .
Never touch the appliance, the power cable or the power
plug with wet hands .
Never submerge the appliance in liquids or never allow
liquids to penetrate the appliance housing . Do not expose
the appliance to humidity and do not use it outdoors . If any
liquid gets into the housing, disconnect the appliance from
the mains power socket immediately and have it repaired
by a qualified technician .
4 
GB │ IE │ NI
SHC 240 B2

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents