Software Update - Kurzweil SP7 Grand Quick Start Manual

Quick Start

Software Update

Thank you for purchasing the Kurzweil SP7 Grand Stage Piano by HDC Young Chang. This manual
briefly introduces you to the fundamentals of the SP7 Grand. The manual can also be downloaded via
mobile device by scanning the QR code (Global mode / Info page).
Quick Start
Check www.kurzweil.com for system updates.
Check your SP7 Grand's current OS version by going to the Global mode Info page. Compare this
with the latest version posted on www.kurzweil.com and update as needed.
Setting Up the SP7 Grand
1. If your SP7 Grand has been out in the cold during shipping, give it time to warm up to room tem-
perature before powering it on, since condensation may have formed inside.
2. Place the SP7 Grand on a keyboard stand or on a hard, flat, level surface.
3. Be sure to connect the supplied DC power adapter to the DC power jack of the SP7 Grand.
4. Connect the DC adapter power cable to the power outlet.
5. Connect the supplied switch pedal to the SW1 (Sustain) jack on the back of the instrument.
6. If you have an additional switch pedal, plug it into the SW2 jack for sostenuto control.
7. If you have a MIDI CC pedal (also known as a MIDI expression or volume pedal), plug it into the CC
(VOLUME) jack for volume control.
8. If you are using speakers, turn the master volume all the way down on your amplifier or mixer.
Using standard (1/4-inch) audio cables, first plug into the input jacks of your amplifier or mixer, then
plug the other end of the cables into the SP7 Grand Main Out jacks (connecting in this order mini-
mizes the possibility of static discharge damage.) For a mono signal, only use the LEFT (MONO)
jack, and leave the RIGHT jack unplugged.
9. If you are using headphones, connect stereo headphones to the headphone jack on the rear panel.
10. To protect your hearing, set the volume of the instrument appropriately.
Powering on the SP7 Grand
1. When installation is complete, press the power button on the back of the device.
2. When using with speakers, adjust the volume on the mixer or amplifier appropriately.
3. Play the keyboard while turning the SP7 Grand's volume knob to find the appropriate volume.
(If a volume pedal is connected, increase the volume on the pedal and adjust the volume on the SP7
Grand)
4. If you hear distortion when using the mixer, reduce the mixer's gain or engage its pad function.
5. When turning off the power after use, set the master volume of the mixer or amplifier to minimum
first and then turn off the SP7 Grand power.
2
GETTING STARTED GUIDE