Software Updates - Kurzweil CUP2 Service Manual

Software Updates

1. Go to
Note: The Operating System and Object les are combined in one le type (.KUF).
2. Press and hold the Play/Stop button and apply power to the unit. When CUP2 boot loader
3. The LED display then scrolls the following:
4. Connect a USB cable from a computer to the USB port on the CUP2 rear panel.
5. Check the computer desktop and verify that the CUP2 USB device/window is present.
6. Press the Play button. The LED display will show, "
7.
8. Drag and drop the update le(s) directly to the CUP2 icon on the computer desktop.
Note: Be sure to always read the downloaded release notes and installation instructions in
case they have changed since this manual was written.
9. Unmount or "safely remove" the CUP2 icon from your computer.
10. Press the Next button on the CUP2 to begin the update. The LED display will show:
11. When the update is complete, the LED display will show:
12. Turn the CUP2 off, then on again to test the software updates.
www.kurzweilmusicsystems.com
software version to your computer desktop.
and its version number scroll across the display, release the Play/Stop button.
"Run CUP2"
,
(This should appear on the desktop as an icon or window.)
Press the Next button. The display will show "
"Updating..."
Troubleshooting & Maintenance
and follow the links to download the latest
"CUP2 Boot Loader V1.xx”"
Update software"
Update"
. Press the Next button again.
"Done"
Software Updates
, then displays
.
.
5- 3