2.6
Installing the Warning Lamp and Door Interlock Switch
Refer to Appendix A for a complete installation guide.
This system can be equipped with a warning lamp and the door interlock
switch, activated when the X-ray is energized.
The warning lamp and door interlock switch are not included with the
equipment.
The warning lamp and the door interlock switch must be installed by a
qualified technician.
2.7
Installing the Emergency Stop Switch
Refer to Appendix B for a complete installation guide.
Install the emergency stop switch along with the main power cable in the
central distribution panel.
Install this switch within easy reach of the operator but cannot be
accidentally pressed.
The switch must be a fool-proof model.
Green X / X18 (Model: PHT-75CHS) Installation Manual
2. Pre-Installation Requirement
23