Related Manuals for ARRI ALEXA Mini LF SUP 7.1.2
Summary of Contents for ARRI ALEXA Mini LF SUP 7.1.2
- Page 1 ALEXA Mini LF SUP 7.1.2 Software Update Package (SUP) Mini LF 7.1.2 R E L E A S E N O T E S October 5, 2022...
-
Page 2: Table Of Contents
Table of Contents A. Introduction ..........................3 ALEXA Mini LF SUP 7.1.2 Changes Overview ................3 Updating Camera, Viewfinder and Lens Mount ..............3 Updating LBUS Accessories ..................... 3 Downdating ..........................3 Codex Compact Drive 1TB Update..................4 Software Compatibility Notes and Sample Footage ............... 4 Registration .......................... -
Page 3: Introduction
SUP 7.1.1 to SUP 7.1.2 (note: this can take up to 20 Minutes). If your camera is not running Mini LF SUP 7.1.1, please update it to 7.1.1 before updating to SUP 7.1.2. ALEXA Mini LF SUP 7.1.1 is still available on the ARRI website. -
Page 4: Codex Compact Drive 1Tb Update
Codex or ARRI Service station. Please note that Mini LF SUP 7.1.2 will not update Compact Drives. ALEXA Mini LF cameras running SUP 7.1.2 are compatible with Compact Drives with and without the update. More information can be found on the ARRI Website here. -
Page 5: New Features And Changes
ALEXA 35 SUP 1.0.3 Revision 7 and ALEXA Mini LF SUP 7.1.2 are required to support the changed components inside the Compact Drive 2TB. -
Page 6: Known Issues - Software
WiFi does not work as expected in WPA encrypted networks Only networks indicating WPA/WPA2 encryption will perform as expected. WPA only encrypted networks are not supported. ALEXA Mini LF SUP 7.1.2 Release Notes Page 6 of 8 All data subject to change without further notice. -
Page 7: Sync
If a RAB-1 Clamp 2 is found to slip on the Rear Accessory Bracket RAB-1 (K2.0013937) or not to release correctly, please contact ARRI Service to get the part repaired or exchanged. Compact Bridge Plate CBP-1 and CBP-2 lever malfunction To release the Compact Bridge Plate CBP-1 or CBP-2 from a balance plate, the safety catch on the main locking lever of the CBP must be released for the main locking lever to be moved from the BALANCE to the RELEASE position. -
Page 8: Update Procedure
CONFIRM. This will create the required folder structure on the USB stick. ▪ Connect the USB stick to your computer and place the downloaded *.SUP file in the folder ARRI/A-MINI-LF/SUP on the USB stick. Then place the downloaded *.lic file in the folder ARRI/A-MINI- LF/LICENSES on the USB stick. ▪...