Live Switcher
(2) Clip Register: This command applies to Clip operations. The targeted Clip is stored in Local
(SSD), so it can be specified by combining the page number (1 to 9) and the register
number (1 to 9).
The possible operations are as follows.
(a) Request: Indicates the operating request to the Clip. Click this button to display the
following Request types and change between Recall, Store, and Delete.
(b) Target: Indicates the target channel of the Clip targeted with the Request. Click this
button to display the below target channel selection buttons and to switch between
them. It cannot be selected if the Request is set to Delete.
(c) Name: Indicates the file name of the Clip targeted with the Request. Click this button to
display the below file name entry screen and to enter the file name. It cannot be
selected if the Request is set to Record.
© Panasonic Corporation 2022
Software Control Panel
- 27 -