Table of Contents
Advertisement
Live Switcher
The thumbnail sections serve as image buttons to execute transition of KEY and DSK
individually and also have the role of LEDs for indicating the transition state of KEY and DSK.
Specifically, they flash during a transition and are lit when the transition target is selected.
The outer frame color turns red for On-Air tally or yellow for others.
Page 2 consists of two areas: the Memory area at the top and the VMEM area at the bottom.
Memory area: Perform the SHOT MEMORY, EVENT MEMORY, and MACRO operations.
Memory type selection buttons:
There are three selection buttons: SHOT MEM, EVT MEM, and MCRO. SHOT MEMORY is the
operation target when the SHOT MEM button is clicked, EVENT MEMORY is the operation
target when the EVT MEM button is clicked, and MACRO MEMORY is the operation target
when the MCRO button is clicked.
Page selection buttons:
Select from pages 1 to 10 with the buttons. Change the page with the > button (next) and <
button (previous).
MEM selection area:
The displayed content in the 10 selection areas differs depending on whether SHOT, EVENT, or
MACRO is selected. The details are described later.
Target selection buttons:
There are six selection buttons: ME, XPT, DSK, AUX, CBGD, and CLIP. The buttons are
displayed depending on the MEMORY type selection button as follows.
A SHOT MEM: ME, XPT, DSK, AUX, CBGD
B EVENT MEM: ME, XPT, DSK, AUX, CBGD, CLIP
C MCRO: Buttons are not displayed.
© Panasonic Corporation 2022
D - 1: Screen Layout of Page 1
Memory area
VMEM area
Software Control Panel
- 15 -
Advertisement
Table of Contents
