Table of Contents
Advertisement
Live Switcher
8) Command control: The executed internal command processing operation is displayed by using
the buttons. The following four types of command can be edited. Other commands are only
displayed.
(1) Still Memory: This command applies to Still operations. The targeted Still is stored in Local
(SSD), so it can be specified by Name.
The possible operations are as follows.
(a) Request: Indicates the operating request to the Still. Click this button to display the
Request types of Recall, Record, Store, and Delete, and to switch between them.
(b) Target: Indicates the target channel of the Still targeted with the Request. Click this
button to display the below target channel selection buttons and to switch between
them. It cannot be selected if the Request is set to Delete.
(c) Name: Indicates the file name of the Still targeted with the Request. Click this button to
display the below file name entry screen and to enter the file name. It cannot be
selected if the Request is set to Record.
© Panasonic Corporation 2022
Software Control Panel
- 26 -
Advertisement
Table of Contents
