Panasonic AV-SF500 Operating Instructions Manual page 13

Live Switcher
B Material assignment area
This area displays a total of 18 material videos (up to 24 materials divided into up to two pages). The
page can be changed by selecting the < button (previous) or > button (next) on the right side of the
operation menu area of A or by swiping left (next) or swiping right (previous) in the area of B. Also,
the names are displayed below the materials. The bus target to assign material can be specified by
clicking any of the PVW, PGM, and KEY buttons on the right side of the operation menu area of A.
The material name of the material selected for the specified bus target is indicated by yellow
highlighting. Furthermore, the frame of that material is red if Tally Group1 or green if Tally Group2 is
assigned as the tally.
Set the materials of the material assignment area in the Setting screen.
PGM, PVW, ME PGM, MV1, and MV2 can only be assigned to AUX.
C PGM/PST display area
Displays the PVW/PGM video. Under default settings, the PVW video appears on the left and the
PGM video appears on the right. If you want to switch the positions of the two displays, click the
or button. The display positions from previous sessions will be remembered each time you start
the software. The next transition setting state (BKGD/KEY1) is displayed superimposed on the PVW
video. When the target selection state of the material assignment area of B is PVW video or PGM
video, the corresponding material display area is highlighted in yellow.
D Operation panel area (screen has two pages)
 Page buttons: These page buttons change the display of the operation panel area.
Transition control area
Key control area
 Page 1 consists of two areas: the transition control area at the top and the key control area at the
bottom.
1) Transition control area
(1) BKGD/KEY1 buttons:
Set the next transition selection target (linked with the superimposed display of the next
transition setting status of the PGM/PVW display area). Multiple items can be selected
by clicking with the mouse while pressing the Ctrl key on the keyboard. In the case of a
touch panel, support is also provided for selecting multiple items by multi-touch.
© Panasonic Corporation 2022
D - 1: Screen Layout of Page 1
Software Control Panel
- 13 -