MLA MINI
USER GUIDE
Step 2: Rotate the MSX and Ground Stack Baseplate through 90° so that the assembly is
standing on the Baseplate. Remove the wheelboard. Place the Flying Frame on top of the MSX
cabinet as shown and secure the dropdown brackets using four Flying Pins.
Step 3: For Preset 4 the required angle between the sub and the bottom Mini is 20°, so the Long
Ground Stack Bar must be used between the cabinet and the Flying Frame. Fit the lower end of
the bar into the Flying Frame at the 20° mark and secure with a Flying Pin.
MLA Mini User Guide V1.0
34