Table of Contents
Advertisement
MLA MINI
USER GUIDE
Step 4a (with Universal Tilt Bracket): Lift the first MLA Mini cabinet onto the Universal Tilt
Bracket. The lugs on the ends of the main cross-arm should mate with the slots in the front
corners of the cabinet. Secure these points with flying pins. Attach the rear lug of the bracket to
the Ground Stack hole (marked with a
Flying Pin. Using the rear adjustment knob, set the tilt angle to 14.5°; the angle can be seen by
observing the calibration hole at the right-hand side.
Step 4b (with Fixed Tilt Bracket): Lift the first MLA Mini cabinet onto the bracket. The lugs on
the ends of the main cross-arm should mate with the slots in the front corners of the cabinet.
Secure these points with Flying Pins. Attach the Tilt Bracket Swing Arm to the rear of the tilt
bracket in the Ground Stack hole (marked with a
Ensure the swing arm is pointed upwards as shown.
MLA Mini User Guide V1.0
) in the cabinet's rear mounting plate. Secure with a
) and secure with the Flying Pin supplied.
27
Advertisement
Table of Contents
