Connect To A Dongle; Connect To External Speakers Or; Headphones; Cable Connection - Philips Screeneo U4 User Manual

Connect to a dongle

You can connect a dongle (e.g. Amazon
Fire Stick, Roku Stick or Chromecast) to the
projector to easily watch videos over the
internet. With this connection, images are
shown on the projection screen, and audio is
played on the projector.
Connect a dongle to the projector's HDMI 2
1
(ARC) port using an HDMI cable.
2 Connect the dongle to the projector's
USB-A port using a USB cable .
3 If the projector does not automatically
switch to the correct input source, press
on the remote control to switch the input
source to HDMI 2.
11
External Dongle (not included)
5 Connect to
external speakers
or headphones
You can connect external speakers or
headphones to the projector. With this
connection, audio from the projector is played
through the external speakers or headphones.
• The internal speakers of the projector
are deactivated automatically when
external speakers or headphones are
connected to the projector.
DANGER!
Danger of hearing damage!
Before connecting the headphones,
turn down the volume on the projector.
Do not use the projector over a longer
time at high volume – especially when
using headphones. This could lead to
hearing damage.

Cable connection

1 Using a 3.5 mm audio cable, connect the
jack on the projector to the analogue audio
input (3.5 mm jack, or red and white jacks)
on external speakers. Or connect the
on the projector to headphones.
2 After connecting the speakers or
headphones, press
control to adjust the volume to the desired
level.
jack
/
on the remote
Philips · Screeneo U4