Table of Contents
Advertisement
2
Access the projector's settings menu by
pressing
or
on the projector. Then select Input >
HDMI1 or HDMI2.
Connect to a device through
HDMI™ ARC
The HDMI 1 port on the projector supports
Audio Return Channel (ARC). You can connect
a compatible audio system (e.g. a home
cinema system, AV receiver or sound bar) to
the projector through HDMI™ ARC connection.
With this connection, audio is streamed to the
connected audio system.
Tip: To get 5.1 surround sound, you typically
need to connect the projector to a 5.1 home
cinema system.
1
Make sure the current input source of the
projector is Android TV or HDMI2.
2
Using an HDMI™ cable, connect the HDMI
1 port on the projector to the HDMI™ ARC
port on a compatible audio system.
•
The HDMI™ ARC port on your audio
system might be labeled differently.
See the documentation supplied with
the device for more information.
3
To activate the HDMI™ ARC function on the
projector, access the projector's settings
menu by pressing
control or
on the projector, then select
Sound > Output > ARC.
Connect to devices through
USB-C
You can connect a playback device (e.g. a
mobile phone or PC) to the projector through
USB-C connection. With this connection,
images are shown on the projection screen,
and audio is played on the projector.
1
Using a USB-C cable, connect the USB-C
port on the projector to the USB-C port on
a playback device.
14
on the remote control
on the remote
USB
2
Access the projector's settings menu by
pressing
or
on the projector. Then select Input >
USB-C.
Connect to a dongle
You can connect a dongle (e.g. Amazon Fire
Stick, Roku Stick and Chromecast) to the
projector to easily watch videos over the
internet. With this connection, images are
shown on the projection screen, and audio is
played on the projector.
1
Connect the dongle to the projector's
HDMI 1 or HDMI 2 port using an HDMI™
cable.
2
Connect the dongle to the projector's
USB port using a USB cable . Note: The
maximum current supplied by this port is
5V1.5A.
USB
3
Access the projector's settings menu by
pressing
or
on the projector. Then select Input >
HDMI1 or HDMI2.
HDMI 1
HDMI 2
USB-C
on the remote control
HDMI 1
HDMI 2
USB-C
on the remote control
Philips · NeoPix 520
Advertisement
Table of Contents
