Connect To The Playback Device; Connecting To Devices With Hdmi Output; Connecting To A Computer (Vga) - Philips Screeneo 3.0 User Manual

4 Connect to the playback device

Notice
If no input source is detected the fol-
lowing message appears: NO SIGNAL
Connecting to devices with
HDMI output
Use a HDMI cable to connect the projector to a
Blu-ray player, set top box or gaming console.
Notice
Use any of the HDMI sockets to connect
the projector to a playback device
when a 3D signal is broadcasted.
1 Connect the cable to one of the projector's
HDMI sockets on the rear or side of the
device.
2 Connect the HDMI plug to the HDMI socket of
the playback device.
3 In the Options menu, select HDMI 1,2 or 3
depending on which outlet is being used for
the external device
16
Connecting to a computer
(VGA)
Use a VGA cable to connect the projector to a
computer, laptop or other devices.
Notice
Many laptops do not activate the exter-
nal video output automatically when
you connect a second display such as a
projector. Check your laptop's user
manual to find out how to activate the
external video output.
1 Connect the VGA cable to the projector's VGA
socket.
2 Connect the VGA plug to the VGA socket of
the computer.
3 Adjust the computer's resolution to the cor-
rect setting and switch the VGA signal to an
external monitor. The following resolutions
are supported:
Resolution
VGA 640 x 480
SVGA 800 x 600
XGA 1024 x 768
WXGA 1280 x 768
HD 1280 x 720
FULL HD 1920 x 1080
Image refresh
rate
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
Philips · HDP3550