Initial Setup; Place The Projector; Connect The Android Tv Dongle; Connect To Power Supply - Philips NeoPix Ultra 2+ User Manual

j
Quick access to the setup options (e.g.
picture and sound options).
k
Switch the projector on or to standby.
8

3 Initial setup

Notice
Make sure all devices are disconnected
from their power supplies before
establishing or changing any
connections.

Place the projector

Place the projector on a flat surface such as a
table in front of the projection surface.
Connect the Android TV
Dongle
This projector comes with an Android TV
Dongle (NeoViu D1), allowing you to easily
watch videos over the internet. If you want to
watch videos this way, you must connect the
Android TV Dongle to the projector by following
the steps below.
1 Connect the Android TV Dongle to the
projector's HDMI 1 port using the supplied
HDMI cable.
2 Connect the Android TV Dongle to the
projector's USB port using the supplied
Micro-USB cable .
AV MICRO SD HDMI 1

Connect to power supply

CAUTION!
Always use the
projector on and off.
1 Select a supplied power cable with the
correct plug (EU/UK/US/CH).
2 Connect the power cable to the AC adapter.
HDMI 2 USB DC
button to turn the
Philips · NeoPix Ultra 2
+