Connect To A Dongle; Connect To External Speakers Or; Headphones - Philips NeoPix 120 User Manual

Connect to a dongle

You can connect a dongle (e.g. Amazon Fire
Stick, Roku Stick and Chromecast) to the
projector to easily watch videos over the
internet. With this connection, images are
shown on the projection screen, and audio is
played on the projector.
Connect the dongle to the projector's HDMI
1
port using an HDMI™ cable.
2 Connect the dongle to the projector's USB
port using a USB cable . Note: The maximum
current supplied by this port is 5V2A.
USB
3 The projector should automatically switch
to the correct input source. If not, press
on the remote control to bring up the input
source list, and then select HDMI.
10
HDMI
External Dongle (not included)
5 Connect to
external speakers
or headphones
You can connect external speakers or
headphones to the projector. With this
connection, audio from the projector is played
through the external speakers or headphones.
• The internal speakers of the projector
are deactivated automatically when
external speakers or headphones are
connected to the projector.
DANGER!
Danger of hearing damage!
Before connecting the headphones,
turn down the volume on the projector.
Do not use the projector over a longer
time at high volume – especially when
using headphones. This could lead to
hearing damage.
1 Using a 3.5 mm audio cable, connect the
jack on the projector to the analogue audio
input (3.5 mm jack, or red and white jacks)
on external speakers. Or connect the
on the projector to headphones.
2 After connecting the speakers or
headphones, press the volume control
buttons on the remote control to adjust the
volume to the desired level.
USB HDMI
Philips · NeoPix 120
jack