Power Supply; Overview; Rear View; Side View - Philips Screeneo U4 User Manual

Power supply

Use only a power adapter which is certified for
this product (see Technical data, page 21).
Check whether the mains voltage of the power
supply matches the mains voltage available at
the setup location. This product complies with
the voltage type specified on the product.
The power outlet shall be installed near the
product and shall be easily accessible.
CAUTION!
Always use the
projector off.
Turn off the product and unplug from the
power outlet before cleaning the surface
(see Cleaning, page 17). Use a soft, lint-
free cloth. Never use liquid, gaseous or easily
flammable cleaners (sprays, abrasives, polishes,
alcohol). Do not allow any moisture to reach
the interior of the product.
DANGER!
Risk of eye irritation!
This product is equipped with a high
power LED (Light Emitting Diode),
which emits very bright light. Do not
look directly into the projector lens
during operation. This could cause eye
irritation or damage.
5
button to turn the

2 Overview

Rear view

USB-A HDMI 2 (ARC)
c d e f
a
Pair with the first Bluetooth speaker/
headphones.
b
Pair with the second Bluetooth speaker/
headphones.
DC
c
Connect to the AC adapter.
d
3.5 mm audio output; connect to external
speakers or headphones.
USB-A
e
Connect to a USB storage device/dongle.
HDMI 2 (ARC)
f
Connect to an HDMI output port on a
playback device or the HDMI ARC port on a
compatible audio system.

Side view

HDMI 1
HDMI 1
g
Connect to an HDMI output port on a
playback device.
a
b
g
Philips · Screeneo U4