Logia PM10 User Manual

™
WIRELESS PM2.5/PM10
AIR QUALITY ADD-ON
SENSOR
USER GUIDE
LOWSA100AQW
Thank you for purchasing the Logia Wireless PM2.5/PM10 Air Quality Add-On Sensor.
This User Guide is intended to provide you with guidelines to ensure that operation of
this product is safe and does not pose risk to the user. Any use that does not conform
to the guidelines described in this User Guide may void the limited warranty.
Please read all directions before using the product and retain this guide for reference.
This product is intended for household use only. It is not intended for commercial use.
This product is covered by a limited one-year warranty. Coverage is subject to limits and
exclusions. See warranty for details.
SAFETY PRECAUTIONS
WARNING! Please read all safety precautions and instructions carefully before
using this product. Failure to properly follow the guidelines established here could
result in serious injury or damage to the product.
• Do not cover the ventilation holes with any items such as newspapers, curtains, etc.
• Do not clean the unit with abrasive or corrosive materials.
• Do not tamper, alter, or modify the device.
• Only use fresh new batteries in the product. Do not mix new and old batteries.
• This product is not a toy. Keep out of the reach of children.
• This product is designed for use in the home only as indication of air quality. This product is
not to be used for medical purposes or for public information.
• Do not place the device near open flames or heat sources. Fire, electric shock, product
damage, or injury might occur.
• Only use attachments or accessories with this product specified by the manufacturer.
• Do not submerge the unit in water. Dry the product with a soft cloth if liquid spills on it.
• Do not subject the unit to excessive force, shock, duct, extreme temperature, or humidity.
• This product is only suitable for mounting at height less than 6.6 ft. (2 m).
• Do not tamper with the unit's internal components. Tampering with the product will void
the warranty.
• This product should not be placed in direct sunlight, rain, snow, or other weather conditions.
• When inserting the batteries, make sure that the positive and negative polarities match with
the markings in the compartment.
• Do not mix standard, alkaline, and rechargeable batteries together.
• Dispose of old batteries responsibly and in accordance with local regulations.
• Do not subject your battery to high or low extreme temperatures or low air pressure at high
altitude during use, storage, or transportation.
• Replacement of an old battery with an incorrect type of battery can result in damage to
the product, leakage of flammable liquid or gas, or an explosion. Make sure to follow
guidelines listed in the manual to properly replace the battery.
PRODUCT OVERVIEW
1
1. LCD display
2. MODE button
3. CHECK button
4. Wall mounting holder
2 3 4 5 6
7
8
5. Channel slider (CH 1 – 4)
6. RESET button
7. Battery compartment
8. Micro-USB charging port
LCD DISPLAY
A
B
C
A. PM2.5/PM10 display mode
B. PM2.5/PM10 concentration value
C. PM2.5/PM10 concentration level
OPERATION
INSTALLING THE BATTERIES
1. Use a screwdriver (not included) and remove battery door.
2. Insert the three (3) AA rechargeable batteries (included) into the battery compartment.
3. Screw the battery door back in place.
OPERATING THE SENSOR
• Move the channel slider to set the sensor to a channel.
NOTE: If there is more than one sensor in use, make sure
to assign a different channel number to each one for measurements to properly display
on main console.
• Press the MODE button to toggle between PM2.5 and PM10.
• For manual detection, press the CHECK button to get an updated measurement of PM2.5
or PM10 readings.
• In case of malfunction, use a pin to press the RESET button to restart the sensor.
View the chart below to familiarize yourself with health guidelines that should be followed
during different air quality levels.
PM2.5 PM10 Healthy persons
0~35 0~50 Continue with normal activities
36~53 51~75 Continue with normal activities
76~100 Reduce prolonged or strenuous
54~70
outdoor physical exertion
71~150 101~350 Avoid prolonged or strenuous
outdoor physical exertion
151~250 351~420 Minimize outdoor activity
251+ 420+ Avoid outdoor activity
ADJUSTING THE INTERVAL TIME OF MEASUREMENT
NOTE: When powered by a DC adapter, the sensor will automatically update readings every
minute. When powered by batteries, the sensor will update readings every 10 minutes
by default.
1. Press and hold the CHECK button until the display starts to flash.
2. Press the MODE button to choose between interval times: 10, 20, or 30 minutes.
3. Press the CHECK button to save the new setting.
PAIRING THE SENSOR TO MAIN DISPLAY CONSOLE
• After the sensor is powered on, it will enter pairing mode for 10 minutes.
• Make sure the display console (not included) is also on, and the two devices should
automatically connect.
• Once connection is successful, the signal strength indicator and PM2.5/PM10
information will appear on the display console.
NOTES: To reassign a sensor, switch the channel using the channel slider, then use a pin to
press the RESET button to restart the sensor.
Updated data from the sensor is transmitted to the paired main display console at a fixed
interval of 60 seconds.
D
E
F
D. Sensor channel number
E. Transmission signal
F. Battery level indicator
3
Elderly, children, Persons with chronic
pregnant women disease or heart disease
Continue with normal activities Continue with normal activities
Continue with normal activities Continue with normal activities
Minimize prolonged or strenuous Minimize prolonged or strenuous
outdoor physical exertion outdoor physical exertion
Minimize outdoor activity Avoid outdoor activity
Avoid outdoor activity Avoid outdoor activity
Avoid outdoor activity Avoid outdoor activity