Related Manuals for Logia LOWSC710SWB
Summary of Contents for Logia LOWSC710SWB
- Page 1 ™ 7-IN-1 WIRELESS WEATHER STATION ® WITH WI-FI SOLAR PANEL USER GUIDE LOWSC710SWB...
-
Page 2: Table Of Contents
Thank you for purchasing the Logia 7-in-1 Wireless Weather Station with Wi-Fi ® and Solar ™ Panel. This User Guide is intended to provide you with guidelines to ensure that operation of this product is safe and does not pose risk to the user. Any use that does not conform to the guidelines described in this User Guide may void the limited warranty. -
Page 3: Safety Precautions
SAFETY PRECAUTIONS WARNING! Please read and understand all safety precautions, operating instructions, and care/maintenance instructions before operating this appliance. Keep this manual for future reference. • This product is not a toy. Keep out of the reach of children. • This product is designed for use in the home only as indication of weather conditions. This product is not to be used for medical purposes or for public information. -
Page 4: Product Features
PRODUCT FEATURES 1. Wireless 7-in-1 weather sensor measures wind speed, wind direction, rainfall, UV, light intensity, temperature, and humidity. 2. No calibration needed! The product is fully pre-calibrated and mostly assembled; all you need to do is install it and sync with the included display console. 3. -
Page 5: Package Contents
Weathercloud data servers PACKAGE CONTENTS • Weather console • Wireless indoor thermo-hygro sensor • Wireless 7-in-1 outdoor sensor LOGIA is a tradem • Mounting clamp with two screws Android and Goog • Rubber pads for mounting clamp Apple, IOS, and Ap •... -
Page 6: Weather Console Overview
weather readings with advanced features, such as high/low alert alarm, different weather index, weather readings with advanced features, such as high/low alert alarm, different weather index, and MAX/MIN records. With calibration, sunrise / sunset and moon phase features, this system and MAX/MIN records. -
Page 7: Console Lcd Display Overview
1. [ SNOOZE ] key 9. LCD display 17. Table stand CONSOLE LCD DISPLAY OVERVIEW 2. [ HISTORY ] key 10. [ WI-FI / SENSOR ] key 18. [ ALARMT ] key 3. [ MAX / MIN ] key 11. [ REFRESH ] key 19. -
Page 8: Wireless Indoor Hygro-Thermo Sensor Overview
2. Wind direction & speed 7. Barometer 3. Indoor (Ch) temperature & humidity 8. Rain 4. Weather index 9. Time & Data, moon phase, Sunrise/Sunset time 5. UV index & light intensity (SUN) WIRELESS INDOOR HYGRO-THERMO SENSOR OVERVIEW WIRELESS INDOOR HYGRO-THERMO SENSOR 1. -
Page 9: Installation Instructions
1. Antenna 7. Bubble level gradienter 2. Radiation shield & Thermo-hygro sensor 8. Rain collector 3. Mounting parts (fit for 35 ~40mm diameter 9. Wind vane pole) 10. UV / light sensor 9. Wind direction vane 1. Antenna 5. RESET button 4. - Page 10 Your console can pair up with one wireless 7-in-1 outdoor sensor and up to 7 wireless indoor sensors. (1pc wireless indoor sensor included) INSTALL WIRELESS 7-IN-1 SENSOR SETTING UP RAIN COLLECTOR Your wireless 7-IN-1 sensor measures wind-speed, wind-direction, rainfall, UV, light intensity, temperature and humidity for you.
- Page 11 NOTE: MOUNTING POLE AND DIRECTION ALIGNMENT Install the wireless 7-IN-1 sensor in an open location with no obstructions above and around the Point to Point to sensor for accurate rain and wind measurement. NORTH SOUTH Install the sensor with the smaller end facing the North to properly orient the wind direction vane.
-
Page 12: Setting Up The Wireless Indoor Hygro-Thermo Sensor
SETTING UP THE WIRELESS INDOOR HYGRO-THERMO SENSOR INSTALLING THE BATTERIES LESS INDOOR SENSOR battery door of the sensor. 1. Remove the battery door on the back of the sensor. nnel slide switch to set the channel number for the 2. Use the channel switch to set the channel number for the sensor. Channel 1) 3. - Page 13 POWERING UP THE CONSOLE Plug the power adapter to the power jack located in back of the console. Once the console is turned on, it will automatically enter pairing mode. NOTE: If the LCD display does not turn on, use a pin or other small object to press the RESET button on back of the console.
-
Page 14: Setting Up Wi-Fi Connection
to use Wunderground.com or Weathercloud.net, leave the check boxes unchecked. Press “SETUP” icon Language: English to SETUP page SETUP ADVANCED SETUP INSTRUCTIONS WiFi Router setup Press to search router Select the Wi-fi router (SSID) you will connect to Search Router: ROUTER_A ®... - Page 15 SETUP THE WEATHER SERVER CONNECTION Enter the following information into the below web interface "SETUP" page to connect the console to weather server, If you do not want to use Wunderground.com or Weathercloud.net, please empty the station ID & key to ignore the data upload. SETUP page SETTINGS Press "ADVANCED"...
- Page 16 NOTE: - When WI-FI setup is completed, your PC or mobile will resume your default WI-FI connection. - During AP mode, you can press and hold the [ SENSOR / WI-FI ] key for 6 seconds to stop TIME ZONE AP mode and the console will restore your previous setting.
- Page 17 Press "ADVANCED" key at the top of web interface to enter the advance setting page, this 1. Remove the battery door of the console. page allow you to set and view the calibration data of the console, as well as update the 2.
-
Page 18: Create And Sync Your Weather Server Account
Wi-Fi router. ® NOTE: Logia™ does not own Weather Underground or Weathercloud, and these instructions are liable to change without notice due to changes in either website. CREATE YOUR WEATHER UNDERGROUND ACCOUNT Make sure your display console is connected to your Wi-Fi network, as outlined in brief below. - Page 19 device. 4. Follow their instruction to enter your station information, in the Step "Tell Us More About Your Device", (1) enter a Name for your weather station. (2) choose “Other” in “Device Hardware” section and fill in other the other information (3) select "I Accept" to accept Weather underground's privacy terms, (4) click “Next”...
- Page 20 3 . Enter all the information in Create new device page, for the Model* selection box select Model selection box, choose LOWSC710SWB Series under the Logia section. When presented the "W100 Series" under "CCL" section. for the Link type* selection box select the "Pro 3 .
-
Page 21: Updating The Firmware
4 . Jot down your ID and key for the further setup step. SETUP WI-FI CONNECTION VIEW YOUR WEATHER DATA IN WEATHER UNDERGROUND 1 . When you first power up the console, or press and hold the [ WI-FI / SENSOR ] key for 6 seconds in normal mode, the console LCD will show "AP"... -
Page 22: Operating Instructions
Click the corresponding Upload button to transfer the updated file to the console. The file will install automatically once it is uploaded. You can view update progress on the display console in the wind direction section (the number displayed will correspond to the percentage completed, so 50 = 50% and so on). - Page 23 While adjusting settings, you can press and hold the CLOCK button for two (2) seconds to return to normal mode. NOTE: Moon Phase - In alarm mode, the “ ” icon will display on the LCD. The display console calculates the moon phase according to your time, date, and time zone. The table below explains the corresponding phases and their icons for both Northern and Southern hemispheres.
-
Page 24: Temperature
No signal Weak signal Good signal Activating/Deactivating the Alarm & Temperature Pre-Alarm The temperature pre-alarm will alert you 30 minutes prior to your alarm time whenever the outdoor temperature falls below 26.5 °F (-3 °C). In normal operating mode, press the ALARM button to display the set alarm time for five (5) seconds. - Page 25 the next day. - By pressing [ALARM / SNOOZE] key to enter snooze that the alarm will sound again after 5 minutes. - By pressing and hold [ALARM / SNOOZE] key for 2 seconds to stop the alarm and will activate again in the next day Viewing Outdoor Channels - By pressing [ ALARM ] key to stop the alarm and the alarm will activate again in the next day.
-
Page 26: Wind
No signal Weak signal Good signal 2 . If the signal has discontinued and does not recover within 15 minutes, the signal icon will disappear. The temperature and humidity will display “Er” for the corresponding channel. 3 . If the signal does not recover within 48 hours, the “Er” display will become permanent. You need to replace the batteries and then press [ SENSOR / WI-FI] key to pair up the sensor again . - Page 27 Beaufort Scale Description Wind Speed Land Condition < 1 km/h < 1 mph Calm Calm. Smoke rises vertically. < 1 knots < 0.3 m/s 1.1 ~ 5km/h 1 ~ 3 mph Smoke drift indicates wind direction. Light air 1 ~ 3 knots Leaves and wind vanes are stationary.
-
Page 28: Weather
28 ~ 33 knot against the wind. 13 9 ~ 17 1 m/s 62 ~ 74 km/h Some twigs broken from 39 ~ 46 mph trees. Cars veer on the Gale WEATHER 34 ~ 40 knot road. Progress on foot is seriously impeded. -
Page 29: Pressure
91 °F to 105 °F (33 °C to 40 °C) Extreme Caution Possibility of heat dehydration Empty plastic bins tip over. 10 8 ~ 13 8 m/s 106 °F to 129 °F (41 °C to 54 °C) Danger Heat exhaustion likely 50 ~ 61 km/h ensor's temperature and wind speed data determines the Whole trees in motion. -
Page 30: Rain/ Sun
LATIVE BAROMETRIC READING key to switch between ABSOLUTE / RELATIVE barometric RAIN Rainfall e rainfall and rain rate The Rainfall shows information regarding the rainfall and rain rate. Set the Rainfall Units or 2 seconds to enter unit setting mode. le the rainfall unit between mm and in. -
Page 31: Max/Min
NOTE: To ensure to have correct data, please reset all the rainfall record when you reinstall your Light Intensity wireless 7-IN-1 sensor to other location LIGHT INTENSITY, UV INDEX & SUNBURN TIME During light intensity mode, press and hold the SUN button for two (2) seconds to enter unit This section of display show the sunlight intensity, UV index and sunburn time. -
Page 32: History
Outdoor MAX temperature > outdoor MIN temperature > outdoor MAX humidity > outdoor MIN humidity > indoor* MAX temperature > indoor* MIN temperature > indoor* MAX humidity > indoor* MIN humidity > MAX average wind speed > MAX gust > MAX feels like temperature > MIN feels like temperature >... -
Page 33: Lighting
40°C 40°C 1% ~ 99% (current channel) (current channel) Indoor Current Channel -40°C ~ 80°C -40°C ~ 80°C Humidity Low Alert Indoor Temperature Low Alert Indoor Temperature Low Alert 0°C 0°C Average Wind Speed 0.1m/s ~ 50m/s Wind direction & speed 17.2m/s (current channel) (current channel) -
Page 34: Care And Maintenance
CARE AND MAINTENANCE BATTERY REPLACEMENT If the low battery indicator icon is displayed in the outdoor temperature and humidity section or the corresponding CH section of the LCD console display, this indicates that the batteries in your wireless weather sensor(s) are running low and should be replaced. Make sure to replace all batteries NANCE at the same time. -
Page 35: Specifications
SPECIFICATIONS DISPLAY CONSOLE SPECIFICATIONS DISPLAY CONSOLE General Specifications Dimensions (W x H x D) 8.5″ x 6.9″ x 1″ (215 x 176.5 x 25.5 mm) Weight 1.1 lb. (503 g) (with batteries) Power source DC 5 V, 1 A adaptor Backup battery 3 x AAA 1.5 V batteries (alkaline recommended) Operating temperature range... - Page 36 Weather forecast Sunny, Partly Cloudy, Cloudy, Rainy, Rainy / Stormy and Snowy Display modes Current Memory modes Historical data of past 24 hours, daily Max / Min Alarm Pressure change alert Indoor / Outdoor Temperature Display & Function Specifications Note: The following details are listed as they are displayed or operate on the console.
- Page 37 Display modes Current Memory modes Historical Data of past 24 hours, daily Max Rainfall display mode Hourly / Daily / Weekly / Monthly / Total rainfall Alarm High Daily Rainfall Alert UV Index Display And Function Specifications Note: The following details are listed as they are displayed or operate on the console. Display range 0 ~ 16 Resolution...
-
Page 38: Limited Warranty To Original Consumer
Solar Panel product, hardware or software, even ® if packaged or sold with the Product; (b) Damage caused by use with non-Logia™ 7-in-1 Wireless Weather Station with Wi-Fi ® and Solar Panel products; (c) Damage caused by accident, abuse, misuse, flood, fire, earthquake, or other external causes;... - Page 39 Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. ® If you experience any issues with your Logia 7-in-1 Wireless Weather Station with Wi-Fi and Solar Panel, please contact ™...
- Page 40 LOGIA is a trademark of C&A IP Holdings, LLC, in the U.S. Android is a trademark of Google LLC. Apple and App Store are trademarks of Apple Inc. in the U.S. and other countries. IOS is a trademark of Cisco in the U.S. and other countries and is used under license.