Connecting Antenna - Datalogic DL8700 Installation And Operator's Manual

2
1. Connect all cables to the DL8700. Secure the cables with the strain relief cable clamps,
ensuring a slack loop remains between the cable clamp and the accessory connector.
2. The vehicle mounted bracket and the DL8700 are now ready to use.
2.1.6

Connecting Antenna

DL8700's equipped with a radio require an external antenna. A DL8700
without a radio does not use an antenna.
NOTE
A. Antenna Base
B. Antenna Pin
Place the antenna base over the antenna pin. Push down and twist clockwise until the
antenna is secure.
16
Figure 20 - DL8700 in Vehicle Bracket
A
B
2.4GHz Antenna
Figure 21 - Connect Antenna
900MHz Antenna
DL8700