Table of Contents
Advertisement
5. Cabinet + Frame installation
⑤ Fasten the SCREW D (M4,L8) on the left and right sides of the bottom with
reference to ② in the 2nd cabinet. At this time, the Y-direction step difference
with the side cabinet is adjusted by adjusting the fastening depth of the SCREW.
⑥ Check the difference in screen direction height (Z step) between the two modules, and if adjustment is needed, push the
right screen to the right to create a space between them to adjust the internal adjustment bolt to correct the Z step.
- If the FRAME is extended in the horizontal direction, repeat ①-⑤ to install from lowest row first.
(for 2x2)
69
- Turn counterclockwise and the
module come forward
Turn with 2mm hexagonal wrench
LED R&D Lab(VD)
Advertisement
Table of Contents
