Samsung IWB Series Installation Manual page 52

4. Frame installation
※ Note 2. FRAME extension in horizontal direction
- Insert the EXTENSION GUIDE JIG into two extended FRAME SIDEs according to the guide and fix them by turning the captive screw.
(Basically, install according to the 0 mark of the guide jig, and if the entire frame needs to be narrowed or widened, assemble it narrowly or widely by 1mm according to the -1 and +1 marks.
(Fig.3))
- Connect FRAME ↔ LINK using SCREW B (M4, L6). (Fig.4)
Fig.3
- Normal Gap - If installation is required
by narrowing 1mm
- If installation is required
by expanding 1mm
51
Guide Captive Screw
Fig.4
SCREW B (M4, L6)
LED R&D Lab(VD)