Waring WDM Series Step-By-Step Manual

Step-by-Step Guide
to Programming Your
WDM Series Drink Mixers
MANUAL TIMER PROGRAMMING
1
If programming for the first
time, display will
read R0:00.
If reprogramming, display
will read your current
customized time.
To set time, press and
hold the "-" button
for 3 seconds to enter
the SET mode (display
will blink during SET
mode), SX:XX.
2
Use "-" & "+" buttons
to scroll until you reach
desired time. Wait 5
seconds and time will
be set.
NOTE: To reset time,
press and hold the
"-" & "+" buttons
simultaneously for
3 seconds. This will
return you to (R0:00).
ASSISTED TIMER PROGRAMMING
1
If programming for the
first time, display will
read R0:00. If the timer
is already programmed,
press and hold the "-" &
"+" buttons simultaneously
for three seconds. This will
return you to (R0:00).
2
Mount the cup and actuate. Timer will
begin to count up. When your mix has
reached its desired consistency, remove
the cup.
If additional blend time is needed,
remount the cup within 10 seconds to
continue the count to your desired blend.
3
Press and hold the
"+" button for 3 seconds
to set the time.