Cable To Power Supply Connection; Affixing Cables To Cabinet; Safety Precautions - Datalogic JOYA X1 R2U User Manual

Table of Contents

1 5

5.3.8

Cable to Power Supply Connection

All 12 Vdc power supply connections, both the main power cable and the power

junction cables must be made according to the following requirements:

Power Junction Cable

Wires

Brown

Blue

Yellow-Green

5.3.9

The ends of the junction cables that are connected to the main cable groups

must be affixed to the cabinet sides so as to guarantee the following conditions:

it must be possible to extract the JOYA Cradle Dispenser from the front

•

of the cabinet while the cable is connected so that the connector can be

plugged in or out of the Cradle Dispenser from outside the cabinet.

when the JOYA Cradle Dispenser is mounted in the cabinet, its cable

•

must be laid against the supporting crosspiece so that it does not block

objects which may accidentally fall through the Cradle Dispenser into the

inside of the cabinet.

Next image shows an example of affixing the Cradle Dispenser cables to the

cabinet. The Cradle Dispenser cables are connected to the main power cables

through IDC connectors.

Connection

+12V

ground

earth ground

DATALOGIC JOYA™ X1

Designation

-V

FG or

Table of Contents