Barcode Data Capture - Datalogic JOYA X1 R2U User Manual

DATALOGIC JOYA™ X1
1 3
To configure and enable data capture parameters refer to par. 3.10.
3.7.1

Barcode Data Capture

To scan barcodes, point the Datalogic JOYA™ X1 scanner model onto the
code from a distance within the reading range while pressing the "Up" key.
The lighted band emitted by the reader must completely intercept the barcode
as shown in the figure below. If enabled, the emission of an acoustic signal will
indicate that the scan has taken place correctly.
Pop-up windows will report the data and the symbology of the scanned barcode
(see: Configure/Decoding Options paragraph).
38