Datalogic JOYA X1 R2U User Manual page 26

1 3
Perform a software reset;
Enable the reader trigger when the "+" key is pressed. Default is "enabled";
A reset (either HW or SW) is required to confirm the choice.
Disable the reader trigger when the "+" key is pressed.
A reset (either HW or SW) is required to confirm the choice.
When the ScanToConfig timeout expires, Windows CE desktop will appear on
the screen. Wait a few seconds before starting any activity so that the mobile
computer completes its startup procedure.
The mobile computer goes into power-off (low power with display and keyboard
backlight off), when it is no longer used for more than a programmable timeout,
20
DATALOGIC JOYA™ X1